.. zephyr:board:: esp32s3_geek

Overview

---

The ESP32-S3-GEEK_ is a geek development board designed by Waveshare. It is based on the Espressif ESP32-S3R2 chip. It has an USB A connector, a 1.14inch LCD screen, a microSD card slot, and several expansion connectors.

Hardware

---

• ESP32-S3R2 microcontroller with 2MB of on-chip PSRAM
• 16MB of on-board flash
• USB type A connector
• BOOT button
• 135x240 pixels 1.14 inch color LCD screen
• microSD card slot
• 4-pin I2C connector (Quiic / Stemma QT compatible)
• 3-pin UART connector
• 3-pin GPIO connector

See also ESP32-S3-GEEK wiki_ and schematic_.

.. include:: ../../../espressif/common/soc-esp32s3-features.rst :start-after: espressif-soc-esp32s3-features

Supported Features

.. zephyr:board-supported-hw::

System requirements

---

.. include:: ../../../espressif/common/system-requirements.rst :start-after: espressif-system-requirements

Programming and Debugging

---

.. zephyr:board-supported-runners::

.. include:: ../../../espressif/common/building-flashing.rst :start-after: espressif-building-flashing

Debugging

.. include:: ../../../espressif/common/openocd-debugging.rst :start-after: espressif-openocd-debugging

References

---

.. target-notes::

.. _ESP32-S3-GEEK: https://www.waveshare.com/esp32-s3-geek.htm

.. _ESP32-S3-GEEK wiki: https://www.waveshare.com/wiki/ESP32-S3-GEEK

.. _schematic: https://files.waveshare.com/wiki/ESP32-S3-GEEK/ESP32-S3-GEEK-Schematic1.pdf