boards/shields/weact_ov2640_cam_module/doc/index.rst
.. _weact_ov2640_cam_module:
WeAct Studio MiniSTM32H7xx OV2640 Camera Sensor ###############################################
Overview
The OV2640 camera sensor is designed to interface with the WeAct Studio MiniSTM32H7xx boards, providing camera sensor capabilities. This shield integrates the OV2640 camera module, which is capable of capturing images and video with a resolution of up to 2 megapixels.
.. figure:: ov2640.webp :align: center :alt: OV2640 Camera Sensor
More information about the OV2640 camera sensor can be found on the
MiniSTM32H7xx GitHub_ and in the OV2640 datasheet_.
Requirements
Your board needs to have a zephyr_camera_dvp device tree label to work with this shield.
The shield connects to the WeAct Studio MiniSTM32H7xx board via the following pins:
+--------------+-----------+-----------------------------+ | Shield Pin | Board Pin | Function | +==============+===========+=============================+ | DCMI_D0 | PC6 | DCMI Data Line 0 | +--------------+-----------+-----------------------------+ | DCMI_D1 | PC7 | DCMI Data Line 1 | +--------------+-----------+-----------------------------+ | DCMI_D2 | PE0 | DCMI Data Line 2 | +--------------+-----------+-----------------------------+ | DCMI_D3 | PE1 | DCMI Data Line 3 | +--------------+-----------+-----------------------------+ | DCMI_D4 | PE4 | DCMI Data Line 4 | +--------------+-----------+-----------------------------+ | DCMI_D5 | PD3 | DCMI Data Line 5 | +--------------+-----------+-----------------------------+ | DCMI_D6 | PE5 | DCMI Data Line 6 | +--------------+-----------+-----------------------------+ | DCMI_D7 | PE6 | DCMI Data Line 7 | +--------------+-----------+-----------------------------+ | DCMI_HSYNC | PA4 | DCMI HSYNC | +--------------+-----------+-----------------------------+ | DCMI_VSYNC | PB7 | DCMI VSYNC | +--------------+-----------+-----------------------------+ | DCMI_PIXCLK | PA6 | DCMI Pixel Clock | +--------------+-----------+-----------------------------+ | I2C_SDA | PB9 | I2C Data Line | +--------------+-----------+-----------------------------+ | I2C_SCL | PB8 | I2C Clock Line | +--------------+-----------+-----------------------------+ | RCC_MCO1 | PA8 | Clock Output | +--------------+-----------+-----------------------------+ | SUPPLY | PA7 | Power Supply Control (GPIO) | +--------------+-----------+-----------------------------+
Programming
Set --shield weact_ov2640_cam_module when you invoke west build. For example:
.. zephyr-app-commands:: :zephyr-app: samples/drivers/video/capture_to_lvgl/ :board: mini_stm32h743 :shield: weact_ov2640_cam_module :gen-args: -DCONFIG_BOOT_DELAY=2000 :goals: build
.. _MiniSTM32H7xx GitHub: https://github.com/WeActStudio/MiniSTM32H7xx
.. _OV2640 datasheet: https://www.uctronics.com/download/cam_module/OV2640DS.pdf