ST B-CAMS-IMX-MB1854

.. _st_b_cams_imx_mb1854:

ST B-CAMS-IMX-MB1854 ####################

Overview

The B-CAMS-IMX camera module provides a compelling hardware set to handle multiple computer vision scenarios and use cases. It features a high-resolution 5‑Mpx RGB CMOS image sensor, an inertial motion unit, and a Time‑of‑Flight sensor. It can be used with any STM32 boards featuring a MIPI CSI-2® interface with a 22‑pin FFC connector to enable full-featured computer vision on STM32 microcontrollers and microprocessors easily.

.. figure:: st_b_cams_imx.webp :width: 600px :align: center :alt: B-CAMS-IMX-MB1854

 B-CAMS-IMX MB1854 Image (Credit: STMicroelectronics.)

Requirements

The camera module bundle is compatible with all STM32 Discovery kits and Evaluation boards featuring a 22 pins FFC connector, such as the STM32N6570_DK Discovery kit.

Usage

The shield can be used in any application by setting SHIELD to st_b_cams_imx_mb1854 for boards with the necessary device tree node labels.

Set --shield "st_b_cams_imx_mb1854" when you invoke west build. For example:

.. zephyr-app-commands:: :zephyr-app: samples/drivers/video/capture :board: stm32n6570_dk :shield: st_b_cams_imx_mb1854 :goals: build

References

• Product page <https://www.st.com/en/evaluation-tools/b-cams-imx.html>_

• Databrief <https://www.st.com/resource/en/data_brief/b-cams-imx.pdf>_

• User manual <https://www.st.com/resource/en/user_manual/um3354-camera-module-bundle-for-stm32-boards-stmicroelectronics.pdf>_