boards/shields/semtech_sx1261mb2bas/doc/index.rst
.. _semtech_sx1261mb2bas:
Semtech SX1261MB2BAS LoRa Shield ################################
Overview
The Semtech SX1261MB2BAS LoRa shield is an Arduino compatible shield based on the SX1261 LoRa transceiver from Semtech.
More information about the shield can be found
at the mbed SX126xMB2xAS website_.
+-----------------------+-----------------+ | Shield Connector Pin | Function | +=======================+=================+ | A0 | SX1261 RESET | +-----------------------+-----------------+ | D3 | SX1261 BUSY | +-----------------------+-----------------+ | D5 | SX1261 DIO1 | +-----------------------+-----------------+ | D7 | SX1261 SPI NSS | +-----------------------+-----------------+ | D8 | SX1261 ANT SW | +-----------------------+-----------------+ | D11 | SX1261 SPI MOSI | +-----------------------+-----------------+ | D12 | SX1261 SPI MISO | +-----------------------+-----------------+ | D13 | SX1261 SPI SCK | +-----------------------+-----------------+
The SX1261 signals DIO2 and DIO3 are not available at the shield connector.
Requirements
This shield can only be used with a board which provides a configuration
for Arduino connectors (see :ref:shields for more details).
Programming
Set --shield semtech_sx1261mb2bas when you invoke west build. For
example:
.. zephyr-app-commands:: :zephyr-app: samples/subsys/lorawan/class_a :board: nucleo_f429zi :shield: semtech_sx1261mb2bas :goals: build
References
.. target-notes::
.. _mbed SX126xMB2xAS website: https://os.mbed.com/components/SX126xMB2xAS/