Raspberry Pi Camera Module 2

.. _raspberry_pi_camera_module_2:

Raspberry Pi Camera Module 2 ############################

Overview

---

The Raspberry Pi camera module 2 provides a Sony IMX219 rolling shutter in a module featuring a 15-pin FFC connector popularized by Raspberry Pi, present on a wide range of boards.

The NoIR variant is the same as the normal variant, except with the infra-red filter removed.

.. figure:: rpi_cam_v2_normal.jpg :width: 500px :align: center :alt: Raspberry Pi Camera Module 2

Raspberry Pi Camera Module 2, normal variant (Credit: Raspberry Pi.)

.. figure:: rpi_cam_v2_noir.jpg :width: 500px :align: center :alt: Raspberry Pi Camera Module 2 NoIR

Raspberry Pi Camera Module 2, NoIR variant (Credit: Raspberry Pi.)

Requirements

---

The camera module is compatible with all boards featuring a 15 pins FFC connector and the necessary devicetree definitions for a :dtcompatible:raspberrypi,csi-connector.

Usage

---

The shield can be used in any application by setting SHIELD to raspberry_pi_camera_module_2 for boards with the necessary device tree node labels:

.. zephyr-app-commands:: :zephyr-app: samples/drivers/video/capture :board: stm32n6570_dk :shield: raspberry_pi_camera_module_2 :goals: build

References

---

• Product page <https://www.raspberrypi.com/products/camera-module-v2/>_

• Product page (NoIR) <https://www.raspberrypi.com/products/pi-noir-camera-v2/>_

• Datasheet <https://datasheets.raspberrypi.com/camera/camera-module-2-schematics.pdf>_

• Mechanical drawing <https://datasheets.raspberrypi.com/camera/camera-module-2-mechanical-drawing.pdf>_