P3T1755DP Arduino® Shield Evaluation Board

.. _p3t1755dp_ard_i3c_shield:

P3T1755DP Arduino® Shield Evaluation Board ##########################################

Overview

---

P3T1755DP is a ±0.5 °C accurate temperature-to-digital converter with a -40 °C to 125 °C range.

.. figure:: p3t1755dp_ard.webp :align: center :alt: P3T1755DP ARD

Requirements

---

The temperature register always stores a 12 bit two's complement data, giving a temperature resolution of 0.0625 °C. P3T1755DP can be configured for different operation conditions: continuous conversion, one-shot mode or shutdown mode. The device supports 2-wire serial I3C (up to 12.5 MHz) and I²C (up to 3.4 MHz) as communication interface.

For more information about P3T1755DP-ARD see these NXP documents:

• Getting Started with the P3T1755DP-ARD Evaluation Board_
• P3T1755DP-ARD Evaluation Board User Manual_

Hardware Connection

---

Shield board p3t1755dp_ard in I3C mode J10, J11, J12 3-5, the i3c addr is 0x4800000236152a0090 JP2, Jp3 1-2 I3C is from J13 The VDD from arduino is 3v3 JP1 2-3

Shield board p3t1755dp_ard in I2C mode J10, J11, J12 3-5, the i2c addr is 0x48 JP2, Jp3 2-3 The I2C is from Arduino J5 pin9(SCL_ARD) pin10(SDA_ARD) The VDD from arduino is 3v3 JP1 2-3

Programming

---

Set --shield p3t1755dp_ard_i3c when you invoke west build. For example:

.. zephyr-app-commands:: :zephyr-app: samples/sensor/thermometer :board: mimxrt1180_evk/mimxrt1189/cm33 :shield: p3t1755dp_ard_i3c :goals: build

.. _Getting Started with the P3T1755DP-ARD Evaluation Board: https://www.nxp.com/document/guide/getting-started-with-the-p3t1755dp-ard-evaluation-board:GS-P3T1755DP-ARD

.. _P3T1755DP-ARD Evaluation Board User Manual: https://www.nxp.com/docs/en/user-manual/UM11834.pdf