boards/shields/mikroe_pressure_3_click/doc/index.rst
.. _mikroe_pressure_3_click_shield:
Overview
Pressure 3 Click_ is a compact add-on board that contains a board-mount pressure sensor.
This board features the DPS310, a digital XENSIV™ barometric pressure sensor for portable devices from Infineon. It is a fast sensor with a typical measurement time of 27.6ms for Standard mode, down to 3.6ms in Low precision mode. The DPS310 has an operating range from 300 up to 1200hPa with a relative accuracy of 0.06hPa and absolute accuracy of 1hPa. This Click board™ makes the perfect solution for developing portable weather station applications, indoor navigation, drone altitude control, and similar applications that rely on barometric pressure measurements.
.. figure:: images/mikroe_pressure_3_click.webp :align: center :alt: Pressure 3 Click :height: 300px
Pressure 3 Click
Requirements
This shield can only be used with a board that provides a mikroBUS™ socket and defines a
mikrobus_i2c node label for the mikroBUS™ I2C interface. See :ref:shields for more
details.
Programming
Set -DSHIELD=mikroe_pressure_3_click when you invoke west build. For example:
.. zephyr-app-commands:: :zephyr-app: samples/sensor/pressure_polling :board: mikroe_clicker_ra4m1 :shield: mikroe_pressure_3_click :goals: build
References
Pressure 3 Click_Pressure 3 Click schematic_.. _Pressure 3 Click: https://www.mikroe.com/pressure-3-click .. _Pressure 3 Click schematic: https://download.mikroe.com/documents/add-on-boards/click/pressure-3/pressure-3-click-schematic-v100.pdf