boards/shields/mikroe_accel4_click/doc/index.rst
.. _mikroe_accel4_click_shield:
Overview
Accel 4 Click_ is a sensing Click board™, equipped with the FXLS8974CF, a 3 axis accelerometer sensor.
This IC has a separate sensing element on each axis, which allows a very accurate and reliable measurement of the acceleration intensity in a 3D space, offering a basis for accurate positional calculations. Both I2C and SPI communication protocols are supported by the FXLS8974CF. This sensor IC features a powerful programmable interrupt engine, allowing firmware optimization.
.. figure:: images/mikroe_accel_4_click.webp :align: center :alt: Accel 4 Click :height: 300px
Accel 4 Click
Requirements
This shield can only be used with a board that provides a mikroBUS™ socket and defines a
mikrobus_i2c node label for the mikroBUS™ I2C interface. See :ref:shields for more details.
Programming
Set --shield mikroe_accel4_click when you invoke west build. For example:
.. zephyr-app-commands:: :zephyr-app: samples/sensor/accel_polling :board: frdm_mcxn947/mcxn947/cpu0 :shield: mikroe_accel4_click :goals: build flash
See :dtcompatible:nxp,fxls8974 for documentation on the additional binding properties available for
the FXLS8974CF sensor.
References
Accel 4 Click_Accel 4 Click schematic_.. _Accel 4 Click: https://www.mikroe.com/accel-4-click .. _Accel 4 Click schematic: https://download.mikroe.com/documents/add-on-boards/click/accel_4_click/Accel_4_click_v100_Schematic.PDF