Abrobot ESP32 C3 OLED Shield

.. _abrobot_esp32c3oled_shield:

Abrobot ESP32 C3 OLED Shield ############################

Overview

---

.. figure:: abrobot_esp32c3_oled.webp :align: center :alt: Abrobot ESP32 C3 OLED Shield

Abrobot esp32c3 oled only works with sh1106_compatible display driver. It does not support 1306 display driver commands. Its screen resolution is 72x40. Its screen start position is 30, 12.

Requirements

---

This shield can only be used with esp32c3_042_oled board.

Programming

---

Set -b esp32c3_042_oled --shield abrobot_sh1106_72x40 when you invoke west build. For example:

.. zephyr-app-commands:: :zephyr-app: samples/drivers/display :board: esp32c3_042_oled :shield: abrobot_sh1106_72x40 :goals: build