boards/seeed/xiao_esp32c6/doc/index.rst
.. zephyr:board:: xiao_esp32c6
Overview
Seeed Studio XIAO ESP32C6 is powered by the highly-integrated ESP32-C6 SoC.
It consists of a high-performance (HP) 32-bit RISC-V processor, which can be clocked up to 160 MHz,
and a low-power (LP) 32-bit RISC-V processor, which can be clocked up to 20 MHz.
It has a 320KB ROM, a 512KB SRAM, and works with external flash.
This board integrates complete Wi-Fi, Bluetooth LE, Zigbee, and Thread functions.
For more information, check Seeed Studio XIAO ESP32C6_ .
Hardware
This board is based on the ESP32-C6 with 4MB of flash, integrating 2.4 GHz Wi-Fi 6, Bluetooth 5.3 (LE) and the 802.15.4 protocol. It has an USB-C port for programming and debugging, integrated battery charging and an U.FL external antenna connector. It is based on a standard XIAO 14 pin pinout.
.. include:: ../../../espressif/common/soc-esp32c6-features.rst :start-after: espressif-soc-esp32c6-features
.. zephyr:board-supported-hw::
The board uses a standard XIAO pinout, the default pin mapping is the following:
.. figure:: img/xiao_esp32c6_pinout.webp :align: center :alt: XIAO ESP32C6 Pinout
XIAO ESP32C6 Pinout
System Requirements
.. include:: ../../../espressif/common/system-requirements.rst :start-after: espressif-system-requirements
Programming and Debugging
.. zephyr:board-supported-runners::
.. include:: ../../../espressif/common/building-flashing.rst :start-after: espressif-building-flashing
.. include:: ../../../espressif/common/board-variants.rst :start-after: espressif-board-variants
.. include:: ../../../espressif/common/openocd-debugging.rst :start-after: espressif-openocd-debugging
References
.. target-notes::
.. _Seeed Studio XIAO ESP32C6: https://wiki.seeedstudio.com/xiao_esp32c6_getting_started/