boards/seeed/xiao_esp32c3/doc/index.rst
.. zephyr:board:: xiao_esp32c3
Overview
Seeed Studio XIAO ESP32-C3 is an IoT mini development board based on the Espressif ESP32-C3 WiFi/Bluetooth dual-mode chip.
For more details see the Seeed Studio XIAO ESP32C3_ wiki page.
Hardware
This board is based on the ESP32-C3 with 4MB of flash, WiFi and BLE support. It has an USB-C port for programming and debugging, integrated battery charging and an U.FL external antenna connector. It is based on a standard XIAO 14 pin pinout.
.. include:: ../../../espressif/common/soc-esp32c3-features.rst :start-after: espressif-soc-esp32c3-features
.. zephyr:board-supported-hw::
The board uses a standard XIAO pinout, the default pin mapping is the following:
.. figure:: img/xiao_esp32c3_pinout.jpg :align: center :alt: XIAO ESP32C3 Pinout
XIAO ESP32C3 Pinout
System Requirements
.. include:: ../../../espressif/common/system-requirements.rst :start-after: espressif-system-requirements
Programming and Debugging
.. zephyr:board-supported-runners::
.. include:: ../../../espressif/common/building-flashing.rst :start-after: espressif-building-flashing
.. include:: ../../../espressif/common/board-variants.rst :start-after: espressif-board-variants
.. include:: ../../../espressif/common/openocd-debugging.rst :start-after: espressif-openocd-debugging
References
.. target-notes::
.. _Seeed Studio XIAO ESP32C3: https://wiki.seeedstudio.com/XIAO_ESP32C3_Getting_Started