ContextQMD
Back to Zephyr

Overview

boards/renesas/ek_ra4m2/doc/index.rst

4.4.04.4 KB
Original Source

.. zephyr:board:: ek_ra4m2

Overview

The Renesas RA4M2 group of 32-bit microcontrollers (MCUs) uses the high-performance Arm Cortex®-M33 core. In concert with the secure crypto engine, it offers secure element functionality. The RA4M2 is built on a highly efficient 40nm process, built on FreeRTOS—and is expandable to use other RTOSes and middleware. The RA4M2 is suitable for IoT applications requiring vast communication options, future proof security, large embedded RAM, and low active power consumption down to 81µA/MHz running the CoreMark® algorithm from Flash.

The MCU in this series incorporates a high-performance Arm Cortex®-M33 core running up to 100 MHz with the following features:

Renesas RA4M2 Microcontroller Group

  • R7FA4M2AD3CFP
  • 100-pin LQFP package
  • 100 MHz Arm® Cortex®-M33 core
  • 512 kB Code Flash, 128 KB SRAM
  • Native pin access through 4 x 28-pin male headers
  • MCU current measurement points for precision current consumption measurement
  • Multiple clock sources - RA MCU oscillator and sub-clock oscillator crystals, providing precision 24.000 MHz and 32,768 Hz reference clock. Additional low-precision clocks are available internal to the RA MCU

System Control and Ecosystem Access

  • USB Full Speed Host and Device (micro AB connector)

  • Three 5 V input sources

    • USB (Debug, Full Speed)
    • External power supply (using surface mount clamp test points and power input vias)

  • Three Debug modes

    • Debug on-board (SWD)
    • Debug in (ETM, SWD, and JTAG)
    • Debug out (SWD)

  • User LEDs and buttons

    • Three User LEDs (red, blue, green)
    • Power LED (white) indicating availability of regulated power
    • Debug LED (yellow) indicating the debug connection
    • Two User buttons
    • One Reset button

  • Five most popular ecosystems expansions

    • 2 Seeed Grove® system (I2C/Analog) connectors
    • SparkFun® Qwiic® connector
    • 2 Digilent PmodTM (SPI and UART) connectors
    • ArduinoTM (Uno R3) connector
    • MikroElektronikaTM mikroBUS connector

  • MCU boot configuration jumper

Special Feature Access

  • 32 MB (256 Mb) External Quad-SPI Flash

Hardware

Detailed hardware features for the RA4M2 MCU group can be found at RA4M2 Group User's Manual Hardware_

.. figure:: ra4m2_block_diagram.webp :width: 442px :align: center :alt: RA4M2 MCU group feature

RA4M2 Block diagram (Credit: Renesas Electronics Corporation)

Detailed hardware features for the EK-RA4M2 MCU can be found at EK-RA4M2 - User's Manual_

Supported Features

.. zephyr:board-supported-hw::

Programming and Debugging

.. zephyr:board-supported-runners::

Applications for the ek_ra4m2 board target configuration can be built, flashed, and debugged in the usual way. See :ref:build_an_application and :ref:application_run for more details on building and running.

Flashing

Program can be flashed to EK-RA4M2 via the on-board SEGGER J-Link debugger. SEGGER J-link's drivers are available at https://www.segger.com/downloads/jlink/

To flash the program to board

  1. Connect to J-Link OB via USB port to host PC

  2. Make sure J-Link OB jumper is in default configuration as describe in EK-RA4M2 - User's Manual_

  3. Execute west command

    .. code-block:: console

     west flash -r jlink

Debugging

You can use Segger Ozone (Segger Ozone Download_) for a visual debug interface

Once downloaded and installed, open Segger Ozone and configure the debug project like so:

  • Target Device: R7FA4M2AD
  • Target Interface: SWD
  • Target Interface Speed: 4 MHz
  • Host Interface: USB
  • Program File: <path/to/your/build/zephyr.elf>

Note: It's verified that we can debug OK on Segger Ozone v3.30d so please use this or later version of Segger Ozone

References

  • EK-RA4M2 Website_
  • RA4M2 MCU group Website_

.. _EK-RA4M2 Website: https://www.renesas.com/us/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ek-ra4m2-evaluation-kit-ra4m2-mcu-group

.. _RA4M2 MCU group Website: https://www.renesas.com/us/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ra4m2-100mhz-arm-cortex-m33-trustzone-high-integration-lowest-active-power-consumption

.. _EK-RA4M2 - User's Manual: https://www.renesas.com/us/en/document/mat/ek-ra4m2-v1-users-manual

.. _RA4M2 Group User's Manual Hardware: https://www.renesas.com/us/en/document/man/ra4m2-group-users-manual-hardware

.. _Segger Ozone Download: https://www.segger.com/downloads/jlink#Ozone