.. zephyr:board:: npck3m8k_evb

Overview

The NPCK3M8K_EVB kit is a development platform to evaluate the Nuvoton NPCK3 series microcontrollers. This board is designed to provide a range of peripherals and interfaces for development and testing. It needs to be mated with part number NPCK3M8K.

Hardware

ARM Cortex-M4F Processor
352 KB RAM and 64 KB boot ROM
GPIO headers
UART0 and UART1
JTAG interface

Supported Features

.. zephyr:board-supported-hw::

System Clock

The NPCK3M8K MCU is configured to use the 90Mhz internal oscillator with the on-chip PLL to generate a resulting EC clock rate of 15 MHz. See Processor clock control register (chapter 4 in user manual)

Serial Port

UART1 is configured for serial logs.

Programming and Debugging

.. zephyr:board-supported-runners::

This board comes with a Cortex ETM port which facilitates tracing and debugging using a single physical connection. In addition, it comes with sockets for JTAG only sessions.

Flashing

Build the application as usual for the npck3m8k_evb board.

Debugging

Use JTAG/SWD with a J-Link.

References

.. target-notes::