.. zephyr:board:: az3166_iotdevkit

Overview

The AZ3166 IoT DevKit from MXChip is a development board designed for IoT (Internet of Things) projects. It's an all-in-one board powered by an Arm Cortex-M4 processor. On-board peripherals include an OLED screen, headphone output, stereo microphone and abundant sensors like humidity & temperature, pressure, motion (accelerometer & gyroscope) and magnetometer.

More information about the board can be found at the MXChip AZ3166 website_.

Hardware

The MXChip AZ3166 IoT DevKit has the following physical features:

STM32F412 Arm Cortex M4F processor at 96 MHz
Working voltage: 3.3v or USB power supply
Supports 3.3V DC-DC, maximum current 1.5A
OLED display, 128x64 pixels
2 programmable buttons
1 RGB LED
3 LED for status indicators ("Wi-Fi", "Azure", "User")
Security encryption chip
Infrared emitter for IR remote control or interaction
Motion sensor (LSM6DSL)
Magnetometer sensor (LIS3MDL)
Atmospheric pressure sensor (LPS22HB)
Temperature and humidity sensor (HTS221)
EMW3166 Wi-Fi module with 256K SRAM，1M+2M Byte SPI Flash

Supported Features

.. zephyr:board-supported-hw::

.. note::

The EMW3166 Wi-Fi module is currently not supported.

Programming and Debugging

.. zephyr:board-supported-runners::

Flashing

Build and flash applications as usual (see :ref:build_an_application and :ref:application_run for more details).

Here is an example for the :zephyr:code-sample:hello_world application.

First, run your favorite terminal program to listen for output.

.. code-block:: console

$ minicom -D <tty_device> -b 115200

Replace :code:<tty_device> with the port where the micro:bit board can be found. For example, under Linux, :code:/dev/ttyACM0.

Then build and flash the application in the usual way.

.. zephyr-app-commands:: :zephyr-app: samples/hello_world :board: az3166_iotdevkit :goals: build flash

References

.. target-notes::

.. _MXChip AZ3166 website: https://www.mxchip.com/en/az3166