boards/mikroe/stm32_m4_clicker/doc/index.rst
.. zephyr:board:: mikroe_stm32_m4_clicker
Overview
The Mikroe STM32 M4 Clicker development board contains a STMicroelectronics Cortex-M4 based STM32F415RG Microcontroller operating at up to 168 MHz with 1 MB of Flash memory and 192 KB of SRAM.
Hardware
The STM32 M4 Clicker board contains a USB connector, two LEDs, two push
buttons, and a reset button. It features a mikroBUS socket for interfacing
with external electronics. For more information about the development
board see the STM32 M4 Clicker website_.
.. zephyr:board-supported-hw::
Programming and debugging
.. zephyr:board-supported-runners::
You can build and flash an application in the usual way (See
:ref:build_an_application and
:ref:application_run for more details).
Here is an example for building and flashing the :zephyr:code-sample:blinky application.
.. zephyr-app-commands:: :zephyr-app: samples/basic/blinky :board: mikroe_stm32_m4_clicker :goals: build flash
Debugging also can be done in the usual way.
The following command is debugging the :zephyr:code-sample:blinky application.
Also, see the instructions specific to the debug server that you use.
.. zephyr-app-commands:: :zephyr-app: samples/basic/blinky :board: mikroe_stm32_m4_clicker :maybe-skip-config: :goals: debug
References
.. target-notes::
.. _STM32 M4 Clicker website: https://www.mikroe.com/clicker-stm32f4