boards/mikroe/clicker_ra4m1/doc/index.rst
.. zephyr:board:: mikroe_clicker_ra4m1
Overview
The Mikroe Clicker RA4M1 development board contains a Renesas Cortex-M4 based R7FA4M1AB3CFM Microcontroller operating at up to 48 MHz with 256 KB of Flash memory and 32 KB of SRAM.
Hardware
The Clicker RA4M1 board contains a USB Type-C connector, two LEDs, two push
buttons, and a reset button. It has J-Link onboard and mikroBUS socket for
interfacing with external electronics. For more information about the
development board see the Clicker RA4M1 website_.
.. zephyr:board-supported-hw::
Programming and debugging
.. zephyr:board-supported-runners::
You can build and flash an application in the usual way (See
:ref:build_an_application and
:ref:application_run for more details).
Here is an example for building and flashing the :zephyr:code-sample:blinky application.
.. zephyr-app-commands:: :zephyr-app: samples/basic/blinky :board: mikroe_clicker_ra4m1 :goals: build flash
Debugging also can be done in the usual way.
The following command is debugging the :zephyr:code-sample:blinky application.
Also, see the instructions specific to the debug server that you use.
.. zephyr-app-commands:: :zephyr-app: samples/basic/blinky :board: mikroe_clicker_ra4m1 :maybe-skip-config: :goals: debug
References
.. target-notes::
.. _Clicker RA4M1 website: https://www.mikroe.com/ra4m1-clicker