.. zephyr:board:: ttgo_t7v1_5

Overview

LILYGO® TTGO T7 Mini32 V1.5 ia an IoT mini development board based on the Espressif ESP32-WROVER-E module.

It features the following integrated components:

ESP32 chip (240MHz dual core, 520KB SRAM, Wi-Fi, Bluetooth)
on board antenna
Micro-USB connector for power and communication
JST GH 2-pin battery connector
LED

Hardware

This board is based on the ESP32-WROVER-E module with 4MB of flash (there are models 16MB as well), WiFi and BLE support. It has a Micro-USB port for programming and debugging, integrated battery charging and an on-board antenna.

.. include:: ../../../espressif/common/soc-esp32-features.rst :start-after: espressif-soc-esp32-features

Supported Features

.. zephyr:board-supported-hw::

System Requirements

.. include:: ../../../espressif/common/system-requirements.rst :start-after: espressif-system-requirements

Programming and Debugging

.. zephyr:board-supported-runners::

.. include:: ../../../espressif/common/building-flashing.rst :start-after: espressif-building-flashing

.. include:: ../../../espressif/common/board-variants.rst :start-after: espressif-board-variants

Debugging

.. include:: ../../../espressif/common/openocd-debugging.rst :start-after: espressif-openocd-debugging

Sample Applications

The following samples will run out of the box on the TTGO T7 V1.5 board.

To build the blinky sample:

.. zephyr-app-commands:: :tool: west :app: samples/basic/blinky :board: ttgo_t7v1_5/esp32/procpu :goals: build

To build the bluetooth beacon sample:

.. zephyr-app-commands:: :tool: west :app: samples/bluetooth/beacon :board: ttgo_t7v1_5/esp32/procpu :goals: build

References

.. target-notes::

.. _Lilygo TTGO T7-V1.5 schematic: https://github.com/LilyGO/TTGO-T7-Demo/blob/master/t7_v1.5.pdf .. _Lilygo github repo: https://github.com/LilyGO/TTGO-T7-Demo/tree/master .. _Espressif ESP32-WROVER-E datasheet: https://www.espressif.com/sites/default/files/documentation/esp32-wrover-e_esp32-wrover-ie_datasheet_en.pdf