.. zephyr:board:: kit_pse84_eval

Overview

The PSOC™ Edge E84 Evaluation Kit (KIT_PSE84_EVAL) enables applications to use the PSOC™ Edge E84 Series Microcontroller (MCU) together with multiple on-board multimedia, Machine Learning (ML), and connectivity features including custom MIPI-DSI displays, audio interfaces, and AIROC™ Wi-Fi and Bluetooth® combo-based connectivity modules.

The PSOC™ Edge E84 MCUs are based on high-performance Arm® Cortex®-M55 including Helium DSP support, an Ethos™-U55 NPU, and a low-power Arm® Cortex®-M33 paired with Infineon's ultra-low power NNLite hardware accelerator. They integrate 2.5D graphics accelerators and display interfaces, while featuring always-on acoustic activity and wake-word detection, efficient HMI operations, and extended battery life.

The evaluation kit carries a PSOC™ Edge E84 MCU on a SODIMM-based detachable SOM board connected to the baseboard. The MCU SOM also has 128 MB of QSP| Flash, 1GB of Octal Flash, 128MB of Octal RAM, PSOC™ 4000T as CAPSENSE™ co-processor, and onboard AIROC™ Wi-Fi and Bluetooth® combo.

Hardware

For more information about the PSOC™ Edge E84 MCUs and the PSOC™ Edge E84 Evaluation Kit:

PSOC™ Edge E84 Arm® Cortex® Multicore SoC Website_
PSOC™ Edge E84 Evaluation Kit Website_

Kit Features:

Cortex®-M55 CPU with Helium™ DSP
Advanced ML with Arm Ethos™-U55 NPU
Low-Power Cortex®-M33
NNLite ultra-low power NPU
Analog and Digital Microphones
State-of-the-Art Secured Enclave
Integrated Programmer/Debugger

Kit Contents:

PSOC™ Edge E84 base board
PSOC™ Edge E84 SOM module
4.3in capacitive touch display and USB camera module
USB Type C to Type-C cable
Two proximity sensor wires
Four stand-offs for Raspberry Pi compatible display
Quick start guide

Supported Features

.. zephyr:board-supported-hw::

Connections and IOs

Please refer to kit_pse84_eval User Manual Website_ for more details.

Programming and Debugging

.. NOTE:: BOOT SW on the board MUST be set to ON for any sample applications to work. On some boards this switch may be under the attached LCD screen.

.. zephyr:board-supported-runners::

The KIT-PSE84-EVAL includes an onboard programmer/debugger (KitProg3_) to provide debugging, flash programming, and serial communication over USB. Flash and debug commands use OpenOCD and require a custom Infineon OpenOCD version, that supports KitProg3, to be installed.

Please refer to the ModusToolbox™ software installation guide_ to install Infineon OpenOCD.

Flashing

Applications for the kit_pse84_eval/pse846gps2dbzc4a/m33 board target can be built, flashed, and debugged in the usual way. See :ref:build_an_application and :ref:application_run for more details on building and running.

Applications for the kit_pse84_eval/pse846gps2dbzc4a/m55 board target need to be built using sysbuild to include the required application for the other core.

Enter the following command to compile hello_world for the CM55 core:

.. zephyr-app-commands:: :app: samples/hello_world :board: kit_pse84_eval/pse846gps2dbzc4a/m55 :goals: build flash :west-args: --sysbuild :gen-args: -DOPENOCD=path/to/infineon/openocd/bin/openocd

Debugging

The path to the installed Infineon OpenOCD executable must be available to the west tool commands. There are multiple ways of doing this. The example below uses a permanent CMake argument to set the CMake variable OPENOCD.

.. tabs:: .. group-tab:: Windows

     .. code-block:: shell

        # Run west config once to set permanent CMake argument
        west config build.cmake-args -- -DOPENOCD=path/to/infineon/openocd/bin/openocd.exe

  .. group-tab:: Linux

     .. code-block:: shell

        # Run west config once to set permanent CMake argument
        west config build.cmake-args -- -DOPENOCD=path/to/infineon/openocd/bin/openocd

.. zephyr-app-commands:: :app: samples/basic/blinky :board: kit_pse84_eval/pse846gps2dbzc4a/m33 :goals: debug

Once the gdb console starts after executing the west debug command, you may now set breakpoints and perform other standard GDB debugging on the PSOC E84 CM33 core.

References

PSOC™ Edge E84 Arm® Cortex® Multicore SoC Website_

.. _PSOC™ Edge E84 Arm® Cortex® Multicore SoC Website: https://www.infineon.com/products/microcontroller/32-bit-psoc-arm-cortex/32-bit-psoc-edge-arm/psoc-edge-e84#Overview

.. _PSOC™ Edge E84 Evaluation Kit Website: https://www.infineon.com/evaluation-board/KIT-PSE84-EVAL

.. _kit_pse84_eval User Manual Website: https://www.infineon.com/assets/row/public/documents/30/44/infineon-kit-pse84-eval-qsg-usermanual-en.pdf

.. _ModusToolbox™: https://softwaretools.infineon.com/tools/com.ifx.tb.tool.modustoolboxsetup

.. _ModusToolbox™ software installation guide: https://www.Infineon.com/ModusToolboxInstallguide

.. _KitProg3: https://github.com/Infineon/KitProg3