.. zephyr:board:: holyiot_25008

Overview

The Holyiot 25008 module is based on the Nordic Semiconductor nRF54L15 SoC. It includes a 32 MHz crystal (HFXO), a 32.768 kHz crystal (LFXO), one RGB LED, one push button, and an LIS2DH12 accelerometer.

.. figure:: img/holyiot_25008.webp :align: center :alt: Holyiot 25008 module

 Holyiot 25008 module

Supported Features

.. zephyr:board-supported-hw::

Connections and IOs

• UART: P1.04 (TX), P1.05 (RX)
• Button: P1.13
• RGB LED: P2.09 (red), P1.10 (green), P2.07 (blue)
• LIS2DH12 (SPI): P2.01 (SCK), P2.02 (MOSI), P2.04 (MISO), P2.05 (CS), P2.00 (INT1), P2.03 (INT2)

Programming and Debugging

.. zephyr:board-supported-runners::

The board must be programmed using an external SWD probe connected to SWDIO, SWCLK, VDD, and GND.

Flashing

Here is an example for the :zephyr:code-sample:blinky application:

.. zephyr-app-commands:: :zephyr-app: samples/basic/blinky :board: holyiot_25008/nrf54l15/cpuapp :goals: build flash

References

.. target-notes::

.. _Holyiot: http://www.holyiot.com .. _nRF54L15: https://www.nordicsemi.com/Products/nRF54-series/nRF54L15