boards/heltec/heltec_wifi_lora32_v2/doc/index.rst
.. zephyr:board:: heltec_wifi_lora32_v2
Overview
Heltec WiFi LoRa 32 is a classic IoT dev-board designed & produced by Heltec Automation(TM), it's a highly
integrated product based on ESP32 + SX127x, it has Wi-Fi, BLE, LoRa functions, also Li-Po battery management
system, 0.96" OLED are also included. See the Heltec WiFi LoRa (V2) pages_ for more details.
The features include the following:
Hardware
.. include:: ../../../espressif/common/soc-esp32-features.rst :start-after: espressif-soc-esp32-features
System Requirements
.. include:: ../../../espressif/common/system-requirements.rst :start-after: espressif-system-requirements
Programming and Debugging
.. zephyr:board-supported-runners::
.. include:: ../../../espressif/common/building-flashing.rst :start-after: espressif-building-flashing
.. include:: ../../../espressif/common/board-variants.rst :start-after: espressif-board-variants
.. include:: ../../../espressif/common/openocd-debugging.rst :start-after: espressif-openocd-debugging
Utilizing Hardware Features
The onboard OLED display is of type ssd1306, has 128*64 pixels and is
connected via I2C. It can therefore be used by enabling the
:ref:ssd1306_128_shield as shown in the following for the :zephyr:code-sample:lvgl sample:
.. zephyr-app-commands:: :zephyr-app: samples/subsys/display/lvgl :board: heltec_wifi_lora32_v2/esp32/procpu :shield: ssd1306_128x64 :goals: flash
References
.. target-notes::
.. _Heltec WiFi LoRa (V2) pages: https://heltec.org/project/wifi-lora-32/
.. _Heltec WiFi LoRa (v2) Pinout Diagram: https://resource.heltec.cn/download/WiFi_LoRa_32/WIFI_LoRa_32_V2.pdf
.. _Heltec WiFi LoRa (v2) Schematic Diagrams: https://resource.heltec.cn/download/WiFi_LoRa_32/V2