.. zephyr:board:: esp32c3_rust

Overview

ESP32-C3-DevKit-RUST is based on the ESP32-C3, a single-core Wi-Fi and Bluetooth 5 (LE) microcontroller SoC, based on the open-source RISC-V architecture. This special board also includes the ESP32-C3-MINI-1 module, a 6DoF IMU, a temperature and humidity sensor, a Li-Ion battery charger, and a Type-C USB. The board is designed to be easily used in training sessions, demonstrating its capabilities with all the board peripherals. For more information, check ESP32-C3-DevKit-RUST_.

Hardware

.. include:: ../../../espressif/common/soc-esp32c3-features.rst :start-after: espressif-soc-esp32c3-features

Supported Features

.. zephyr:board-supported-hw::

I2C Peripherals

This board includes the following peripherals over the I2C bus:

+---------------------------+--------------+---------+ | Peripheral | Part number | Address | +===========================+==============+=========+ | IMU | ICM-42670-P | 0x68 | +---------------------------+--------------+---------+ | Temperature and Humidity | SHTC3 | 0x70 | +---------------------------+--------------+---------+

I2C Bus Connection

+---------+--------+ | Signal | GPIO | +=========+========+ | SDA | GPIO10 | +---------+--------+ | SCL | GPIO8 | +---------+--------+

I/Os

The following devices are connected through GPIO:

+--------------+--------+ | I/O Devices | GPIO | +==============+========+ | WS2812 LED | GPIO2 | +--------------+--------+ | LED | GPIO7 | +--------------+--------+ | Button/Boot | GPIO9 | +--------------+--------+

Power

USB type-C (no PD compatibility).
Li-Ion battery charger.

System Requirements

.. include:: ../../../espressif/common/system-requirements.rst :start-after: espressif-system-requirements

Programming and Debugging

.. zephyr:board-supported-runners::

.. include:: ../../../espressif/common/building-flashing.rst :start-after: espressif-building-flashing

.. include:: ../../../espressif/common/board-variants.rst :start-after: espressif-board-variants

Debugging

.. include:: ../../../espressif/common/openocd-debugging.rst :start-after: espressif-openocd-debugging

References

.. target-notes::

.. _ESP32-C3-DevKit-RUST: https://github.com/esp-rs/esp-rust-board/tree/v1.2