boards/dfrobot/beetle_esp32c3/doc/index.rst
.. zephyr:board:: beetle_esp32c3
Overview
The DFRobot Beetle ESP32-C3_ board, mainly intended for IoT
applications, is based on the ESP32-C3 WiFi/Bluetooth
dual-mode chip from Espressif.
Hardware
This board is based on the ESP32-C3 with 4MB of flash, WiFi and BLE support. It has an USB-C port for programming and debugging, built-in battery charging management function via TP4057 chip and 13 IO ports.
.. include:: ../../../espressif/common/soc-esp32c3-features.rst :start-after: espressif-soc-esp32c3-features
.. zephyr:board-supported-hw::
.. figure:: img/beetle_esp32c3_pinout.webp :align: center :alt: Beetle ESP32-C3 Pinout
Beetle ESP32-C3 Pinout
For more details please refer to DFRobot Beetle ESP32-C3 Wiki_
System Requirements
.. include:: ../../../espressif/common/system-requirements.rst :start-after: espressif-system-requirements
Programming and debugging
.. zephyr:board-supported-runners::
.. include:: ../../../espressif/common/building-flashing.rst :start-after: espressif-building-flashing
.. include:: ../../../espressif/common/openocd-debugging.rst :start-after: espressif-openocd-debugging
References
.. target-notes::
.. _DFRobot Beetle ESP32-C3: https://www.dfrobot.com/product-2566.html
.. _DFRobot Beetle ESP32-C3 Wiki: https://wiki.dfrobot.com/SKU_DFR0868_Beetle_ESP32_C3