boards/adafruit/qt_py_esp32s3/doc/index.rst
.. zephyr:board:: adafruit_qt_py_esp32s3
Overview
An Adafruit based Xiao compatible board based on the ESP32-S3, which is great for IoT projects and prototyping with new sensors.
For more details see the Adafruit QT Py ESP32S3_ product page.
Hardware
This board comes in 2 variants, both based on the ESP32-S3 with WiFi and BLE
support. The default variant supporting 8MB of flash with no PSRAM, while the
psram variant supporting 4MB of flash with 2MB of PSRAM. Both boards have a
USB-C port for programming and debugging and is based on a standard XIAO 14
pin pinout.
In addition to the Xiao compatible pinout, it also has a RGB NeoPixel for
status and debugging, a reset button, and a button for entering the ROM
bootloader or user input. Like many other Adafruit boards, it has a
SparkFun Qwiic-compatible STEMMA QT connector for the I2C bus so you
don't even need to solder.
.. include:: ../../../espressif/common/soc-esp32s3-features.rst :start-after: espressif-soc-esp32s3-features
.. zephyr:board-supported-hw::
System Requirements
.. include:: ../../../espressif/common/system-requirements.rst :start-after: espressif-system-requirements
Programming and Debugging
.. zephyr:board-supported-runners::
.. include:: ../../../espressif/common/building-flashing.rst :start-after: espressif-building-flashing
.. include:: ../../../espressif/common/board-variants.rst :start-after: espressif-board-variants
.. include:: ../../../espressif/common/openocd-debugging.rst :start-after: espressif-openocd-debugging
References
.. target-notes::
.. _Adafruit QT Py ESP32S3: https://www.adafruit.com/product/5426
.. _Adafruit QT Py ESP32S3 - PSRAM: https://www.adafruit.com/product/5700
.. _SparkFun Qwiic: https://www.sparkfun.com/qwiic
.. _STEMMA QT: https://learn.adafruit.com/introducing-adafruit-stemma-qt