extras/WiFiManager.template.html
Configure WiFi
Configure WiFi (No Scan)
Info
Setup
Close
Erase
Restart
Exit
Update
Back
100%
70%
10%
100%
Access Point 14 66%
Access Point 15 56%
SSID
Password Show Password
Label for Custom Param
{p}
Save
Refresh
Trying to connect ESP to network.
If it fails reconnect to AP to try again
Connected to {v}
with IP {i}
Not Connected to {v}{r}
Not Connected to apname
Authentication Failure
AP not found
Could not Connect
No AP set
content
content
Chip ID123456Flash Chip ID1234556IDE Flash Size4194304 bytesReal Flash Size4194304 bytesEmptySoft AP IP192.168.4.1Soft AP MAC00:00:00:00:00:00Station MAC00:00:00:00:00:00
| Page | Function |
|---|---|
| / | Menu page. |
| /wifi | Show WiFi scan results and enter WiFi configuration.(/0wifi noscan) |
| /wifisave | Save WiFi configuration information and configure device. Needs variables supplied. |
| /close | Close the configuration server and configuration WiFi network. |
| /info | Information page |
| /close | Close the captiveportal popup,configportal will remain active |
| /exit | Exit Config Portal, configportal will close |
| /restart | Reboot the device |
| /erase | Erase WiFi configuration and reboot Device. Device will not reconnect to a network until new WiFi configuration data is entered. |
Version v1.x.x-xxxxx
Build_date
Build_file
Arduino_version
Github https://github.com/tzapu/WiFiManager
Form UPLOAD
Submit* Upload may not function inside captive portal, Open in browser - http://192.168.4.1
Label for Custom Param
Label for Input Checkbox
Select Choice
Choice1
Choice2
Label for Input SelectOption 1Option 2Option 3Option 4