Wireless Input Plugin

This plugin gathers metrics about wireless link quality by reading the /proc/net/wireless file.

⭐ Telegraf v1.9.0 🏷️ network 💻 linux

Global configuration options <!-- @/docs/includes/plugin_config.md -->

Plugins support additional global and plugin configuration settings for tasks such as modifying metrics, tags, and fields, creating aliases, and configuring plugin ordering. See CONFIGURATION.md for more details.

Configuration

# Monitor wifi signal strength and quality
# This plugin ONLY supports Linux
[[inputs.wireless]]
  ## Sets 'proc' directory path
  ## If not specified, then default is /proc
  # host_proc = "/proc"

Metrics

• metric
  • tags:
    • interface (wireless interface)
  • fields:
    • status (int64, gauge) - Its current state. This is a device dependent information
    • link (int64, percentage, gauge) - general quality of the reception
    • level (int64, dBm, gauge) - signal strength at the receiver
    • noise (int64, dBm, gauge) - silence level (no packet) at the receiver
    • nwid (int64, packets, counter) - number of discarded packets due to invalid network id
    • crypt (int64, packets, counter) - number of packet unable to decrypt
    • frag (int64, packets, counter) - fragmented packets
    • retry (int64, packets, counter) - cumulative retry counts
    • misc (int64, packets, counter) - dropped for un-specified reason
    • missed_beacon (int64, packets, counter) - missed beacon packets

Example Output

This section shows example output in Line Protocol format.

wireless,host=example.localdomain,interface=wlan0 misc=0i,frag=0i,link=60i,level=-50i,noise=-256i,nwid=0i,crypt=0i,retry=1525i,missed_beacon=0i,status=0i 1519843022000000000