<!-- markdownlint-disable -->

{{< highlight yaml >}} apiVersion: v1alpha1 kind: DummyLinkConfig name: dummy1 # Name of the dummy link (interface).

Configure addresses to be statically assigned to the link.

addresses: - address: 192.168.1.100/24 # IP address to be assigned to the link.

# Override the hardware (MAC) address of the link.

hardwareAddr: 2e:3c:4d:5e:6f:70

{{< /highlight >}}

Field	Type	Description	Value(s)
name	string	Name of the dummy link (interface). <details><summary>Show example(s)</summary>{{< highlight yaml >}}
name: dummy1
{{< /highlight >}}</details>
hardwareAddr	HardwareAddr	Override the hardware (MAC) address of the link. <details><summary>Show example(s)</summary>{{< highlight yaml >}}
hardwareAddr: 2e:3c:4d:5e:6f:70
{{< /highlight >}}</details>
up	bool	Bring the link up or down.

If not specified, the link will be brought up. | | |mtu |uint32 |Configure LinkMTU (Maximum Transmission Unit) for the link.

If not specified, the system default LinkMTU will be used (usually 1500). | | |addresses |<a href="#DummyLinkConfig.addresses.">[]AddressConfig</a> |Configure addresses to be statically assigned to the link. | | |routes |<a href="#DummyLinkConfig.routes.">[]RouteConfig</a> |Configure routes to be statically created via the link. | | |multicast |bool |Set the multicast capability of the link. | |

addresses[] {#DummyLinkConfig.addresses.}

AddressConfig represents a network address configuration.

Field	Type	Description	Value(s)
address	Prefix	IP address to be assigned to the link.

This field must include the network prefix length (e.g. /24 for IPv4, /64 for IPv6). <details><summary>Show example(s)</summary>{{< highlight yaml >}} address: 192.168.1.100/24 {{< /highlight >}}{{< highlight yaml >}} address: fd00::1/64 {{< /highlight >}}</details> | | |routePriority |uint32 |Configure the route priority (metric) for routes created for this address.

If not specified, the system default route priority will be used. | |

routes[] {#DummyLinkConfig.routes.}

RouteConfig represents a network route configuration.

Field	Type	Description	Value(s)
destination	Prefix	The route's destination as an address prefix.

If not specified, a default route will be created for the address family of the gateway. <details><summary>Show example(s)</summary>{{< highlight yaml >}} destination: 10.0.0.0/8 {{< /highlight >}}</details> | | |gateway |Addr |The route's gateway (if empty, creates link scope route). <details><summary>Show example(s)</summary>{{< highlight yaml >}} gateway: 10.0.0.1 {{< /highlight >}}</details> | | |source |Addr |The route's source address (optional). | | |metric |uint32 |The optional metric for the route. | | |mtu |uint32 |The optional MTU for the route. | | |table |RoutingTable |The routing table to use for the route.

If not specified, the main routing table will be used. | |