Carousel Demo with ESP-IDF

This project demonstrates how to show the carousel demo on an ESP32 S3 Box.

Prerequisites

Before you can run this example, make sure you have the following:

• An ESP32 S3 Box.
• The Rust xtensa toolchain, which can be obtained from esp-rs. Use the installation instructions provided by espup to install it.
• The esp-idf SDK. The installation guide can be found at esp-idf documentation.

Running the Example

Once you have the prerequisites, navigate to the s3-box directory and execute the following command:

. ${IDF_PATH}/export.sh
idf.py build
idf.py flash monitor

This will build the project, flash it to your ESP32 device, and open a monitor to view the output of the device.