QNX

Tier: 3

Support for the [QNX®][qnx.com] QNX Software Development Platform (SDP), version 7.0, 7.1 and 8.0.

The QNX Software Development Platform (SDP) is a development environment that you download and install on a host computer. It includes a C toolchain for your host, an IDE, and various board support packages for different target platforms. You can then use QNX SDP to build a custom run-time environment which you deploy onto an embedded device. That run-time environment will include a microkernel, whatever services you have selected, and perhaps one or more applications written in Rust.

In QNX SDP 7.x the run-time environment is based on QNX Neutrino RTOS 7.x, while in QNX SDP 8.0 the run-time environment is based on QNX OS 8.0. The name change reflects architectural changes in the RTOS, but both use a microkernel design.

Target maintainers

@flba-eb @gh-tr @jonathanpallant @japaric

Requirements

The following QNX SDP versions and compilation targets are supported:

• QNX SDP 7.0 only offers the io-pkt network stack
• QNX SDP 7.1 uses the io-pkt network stack by default, but also includes the optional io-sock network stack
• QNX SDP 8.0 only offers the io-sock network stack

In the table above, 'full support' indicates support for building Rust applications with the full standard library. A '?' means that support is in-progress. no_std support is for building #![no_std] applications where only core and alloc are available.

For building or using the Rust toolchain for QNX, the relevant version of the QNX Software Development Platform (SDP) must be installed and initialized. Initialization is usually done by sourcing qnxsdp-env.sh (this will be installed as part of the SDP, so see the installation instruction provided with the SDP). Afterwards qcc (the QNX C/C++ compiler) should be available in your system PATH because it will be called during Rust compilation (e.g. for linking executables).

When linking no_std applications, they must link against libc.so (see example). This is required because applications always link against the crt library and crt depends on libc.so. This is done automatically when using the standard library.

Conditional compilation

For conditional compilation, the following QNX specific attributes are defined:

• target_os = "nto"
  • target_env = "nto70" (for QNX SDP 7.0)
  • target_env = "nto71" (for QNX SDP 7.1 with "classic" network stack "io_pkt")
  • target_env = "nto71_iosock" (for QNX SDP 7.1 with "new" network stack "io_sock")
• target_os = "qnx" (for QNX SDP 8.0 or higher)

Building the target

1. Create a bootstrap.toml

   Example content:

   tomlCopy

   profile = "compiler"
   change-id = 999999
   

2. Compile the Rust toolchain for an x86_64-unknown-linux-gnu host

   Compiling the Rust toolchain requires the same environment variables used for compiling C binaries. Refer to the QNX developer manual.

   To compile for QNX, environment variables must be set to use the correct tools and compiler switches:

   • CC_<target>=qcc
   • CFLAGS_<target>=<nto_cflag>
   • CXX_<target>=qcc
   • AR_<target>=<nto_ar>

   With:

   • <target> target triplet using underscores instead of hyphens, e.g. aarch64_unknown_nto_qnx710

   • <nto_cflag>

     • -Vgcc_ntox86_cxx for x86 (32 bit)
     • -Vgcc_ntox86_64_cxx for x86_64 (64 bit)
     • -Vgcc_ntoaarch64le_cxx for Aarch64 (64 bit)

   • <nto_ar>

     • ntox86-ar for x86 (32 bit)
     • ntox86_64-ar for x86_64 (64 bit)
     • ntoaarch64-ar for Aarch64 (64 bit)

   Example to build the Rust toolchain including a standard library for x86_64-linux-gnu and Aarch64-QNX-7.1:

   bashCopy

   export build_env='
       CC_aarch64_unknown_nto_qnx710=qcc
       CFLAGS_aarch64_unknown_nto_qnx710=-Vgcc_ntoaarch64le_cxx
       CXX_aarch64_unknown_nto_qnx710=qcc
       AR_aarch64_unknown_nto_qnx710=ntoaarch64-ar
       '
   
   env $build_env \
       ./x.py build \
           --target x86_64-unknown-linux-gnu,aarch64-unknown-nto-qnx710 \
           rustc library/core library/alloc library/std
   

Building Rust programs

Rust does not ship pre-compiled artifacts for this target. To compile for this target, you must either build Rust with the target enabled (see "Building the target" above), or build your own copy of core by using build-std or similar.

Compiled executables can run directly on QNX, either by including them in the disk image, or copying them over the network to a running system.

Compiling C code requires the same environment variables to be set as compiling the Rust toolchain (see above), to ensure qcc is used with proper arguments. To ensure compatibility, do not specify any further arguments that for example change calling conventions or memory layout.

Running the Rust test suite

The test suites of the Rust compiler and standard library can be executed much like other Rust targets. The environment for testing should match the one used during compiler compilation (refer to build_env and qcc/PATH above) with the addition of the TEST_DEVICE_ADDR environment variable. The TEST_DEVICE_ADDR variable controls the remote runner and should point to a target running the remote-test-server executable.

Note that some tests are failing which is why they are currently excluded by the target maintainers which can be seen in the following example.

To run all tests on a x86_64 QNX Neutrino 7.1 target:

export TEST_DEVICE_ADDR="1.2.3.4:12345" # must address the test target, can be a SSH tunnel
export build_env=<see above>

# Disable tests that only work on the host or don't make sense for this target.
# See also:
# - src/ci/docker/host-x86_64/i686-gnu/Dockerfile
# - https://rust-lang.zulipchat.com/#narrow/stream/182449-t-compiler.2Fhelp/topic/Running.20tests.20on.20remote.20target
# - .github/workflows/ci.yml
export exclude_tests='
    --exclude src/bootstrap
    --exclude src/tools/error_index_generator
    --exclude src/tools/linkchecker
    --exclude tests/ui-fulldeps
    --exclude rustc
    --exclude rustdoc'

env $build_env \
    ./x.py test \
        $exclude_tests \
        --stage 1 \
        --target x86_64-pc-nto-qnx710

Rust std library test suite

The target needs sufficient resources to execute all tests. The commands below assume that a QEMU image is used.

• Ensure that the temporary directory used by remote-test-server has enough free space and inodes. 5GB of free space and 40000 inodes are known to be sufficient (the test will create more than 32k files). To create a QEMU image in an empty directory, run this command inside the directory:

  bashCopy

  mkqnximage --type=qemu --ssh-ident=$HOME/.ssh/id_ed25519.pub --data-size=5000 --data-inodes=40000
  

  /data should have enough free resources. Set the TMPDIR environment variable accordingly when running remote-test-server, e.g.:

  bashCopy

  TMPDIR=/data/tmp/rust remote-test-server --bind 0.0.0.0:12345
  

• Ensure the TCP stack can handle enough parallel connections (default is 200, should be 300 or higher). After creating an image (see above), edit the file output/build/startup.sh:

  1. Search for io-pkt-v6-hc
  2. Add the parameter -ptcpip threads_max=300, e.g.:
     textCopy

     io-pkt-v6-hc -U 33:33 -d e1000 -ptcpip threads_max=300
     

  3. Update the image by running mkqnximage again with the same parameters as above for creating it.

• Running and stopping the virtual machine

  To start the virtual machine, run inside the directory of the VM:

  bashCopy

  mkqnximage --run=-h
  

  To stop the virtual machine, run inside the directory of the VM:

  bashCopy

  mkqnximage --stop
  

• Ensure local networking

  Ensure that 'localhost' is getting resolved to 127.0.0.1. If you can't ping the localhost, some tests may fail. Ensure it's appended to /etc/hosts (if first ping command fails). Commands have to be executed inside the virtual machine!

  bashCopy

  $ ping localhost
  ping: Cannot resolve "localhost" (Host name lookup failure)
  
  $ echo "127.0.0.1 localhost" >> /etc/hosts
  
  $ ping localhost
  PING localhost (127.0.0.1): 56 data bytes
  64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=1 ms
  

Disabling RELocation Read-Only (RELRO)

While not recommended by default, some QNX kernel setups may require the RELRO to be disabled with -C relro_level=off, e.g. by adding it to the .cargo/config.toml file:

[target.aarch64-unknown-nto-qnx700]
rustflags = ["-C", "relro_level=off"]

If your QNX kernel does not allow it, and relro is not disabled, running the compiled binary would fail with syntax error: ... unexpected or similar. This is due to kernel trying to interpret the compiled binary with /bin/sh, and obviously failing. To verify that this is really the case, run your binary with the DL_DEBUG=all env var, and look for this output. If you see it, you should disable relro as described above.

Resolution scope for Executable->/bin/sh:
        Executable->/bin/sh
        libc.so.4->/usr/lib/ldqnx-64.so.2