boards/stm32f723e-disco/doc.md
@defgroup boards_stm32f723e-disco STM32F723E-DISCO board @ingroup boards @brief Support for the STM32F723E-DISCO board
The ST STM32F723E-DISCO is an evaluation board supporting a ARM Cortex-M7 STM32F723IE microcontroller with 256KB of RAM and 523KB of ROM Flash.
A detailed description about the flashing process can be found on the
guides page.
The board name for the STM32F723E-DISCO is stm32f723e-disco.
STDIO is available via the ST-Link programmer.
Use the term target to open a terminal:
make BOARD=stm32f723e-disco -C examples/basic/hello-world term
By default, the USB OTG FS port is used. To use the USB OTG HS port with the
internal UTMI+ HS PHY, enable the module periph_usbdev_hs_utmi:
make BOARD=stm32f723e-disco USEMODULE=periph_usbdev_hs_utmi -C examples/advanced/usbus_minimal