boards/weact-g030f6/doc.md
@defgroup boards_weact-g030f6 WeAct-G030F6 board @ingroup boards @brief Support for the WeAct-G030F6 board
WeAct-G030F6 is a cheap little board based on the STM32G030F6P6 MCU. It does not come with a programmer or USB connection, so an external programmer (ST-Link, DAP-Link, etc) has to be used.
It is available on sites like AliExpress for less than 2€.
| MCU | STM32G030F6P6 |
|---|---|
| Family | ARM Cortex-M0+ |
| Vendor | ST Microelectronics |
| RAM | 8KiB |
| Flash | 32KiB |
| Frequency | up to 64MHz |
| FPU | no |
| Timers | 8 (2x watchdog, 1 SysTick, 5x 16-bit) |
| ADCs | 1x 12-bit |
| UARTs | 2 |
| SPIs | 2 |
| I2Cs | 2 |
| RTC | 1 |
| Vcc | 2.0V - 3.6V |
| Datasheet | Datasheet |
| Reference Manual | Reference Manual |