Doc

@defgroup boards_sodaq-sara-sff SODAQ SARA SFF @ingroup boards @brief Support for the SODAQ SARA SFF boards

General information

General information about this board can be found on the SODAQ support website. Schematic can be found here

Flash the board

Use BOARD=sodaq-one with the make command.

Example with hello-world application:

    make BOARD=sodaq-one -C examples/basic/hello-world flash

@note If the application crashes, automatic reflashing via USB, as explained above won't be possible. In this case, the board must be set in bootloader mode by double tapping the reset button before running the flash command.

Accessing STDIO via UART

STDIO of RIOT is directly available over the USB port.