boards/nucleo-l496zg/doc.md
@defgroup boards_nucleo-l496zg STM32 Nucleo-L496ZG @ingroup boards_common_nucleo144 @brief Support for the STM32 Nucleo-l496zg
The Nucleo-L496ZG is a board from ST's Nucleo family supporting ARM Cortex-M4 STM32L496ZG ultra-low-pawer microcontroller with 320KiB of RAM and 1 MiB of Flash.
You can find general information about the Nucleo144 boards on the @ref boards_common_nucleo144 page.
@image html pinouts/nucleo-l496zg.svg "Pinout for the Nucleo-L496ZG (from STM user manual, UM2179, https://www.st.com/resource/en/user_manual/um2179-stm32-nucleo144-boards-mb1312-stmicroelectronics.pdf, page 31)" width=55%
| MCU | STM32L496ZG |
|---|---|
| Family | ARM Cortex-M4F |
| Vendor | ST Microelectronics |
| RAM | 320KiB |
| Flash | 1MiB |
| Frequency | up to 80MHz |
| FPU | yes |
| Timers | 16 (2x watchdog, 1 SysTick, 11x 16-bit, 2x 32-bit) |
| ADCs | 3x 12-bit (24 channels |
| UARTs | 6 (5x UARTs and one Low-Power UART) |
| SPIs | 3 |
| I2Cs | 4 |
| RTC | 1 |
| CAN | 2 |
| Datasheet | Datasheet |
| Reference Manual | Reference Manual |
| Programming Manual | Programming Manual |
| Board Manual | Board Manual |
A detailed description about the flashing process can be found on the
guides page.
The board name for the Nucleo-L496ZG is nucleo-l496zg.