boards/nucleo-l476rg/doc.md
@defgroup boards_nucleo-l476rg STM32 Nucleo-L476RG @ingroup boards_common_nucleo64 @brief Support for the STM32 Nucleo-L476RG
The Nucleo-L476RG is a board from ST's Nucleo family supporting ARM Cortex-M4 STM32L476RG microcontroller with 128KiB of RAM and 1MiB of Flash.
You can find general information about the Nucleo64 boards on the @ref boards_common_nucleo64 page.
@image html pinouts/nucleo-l476rg.svg "Pinout for the Nucleo-L476RG (from STM user manual UM1724, http://www.st.com/resource/en/user_manual/dm00105823.pdf, page 35)" width=50%
| MCU | STM32L476RG |
|---|---|
| Family | ARM Cortex-M4F |
| Vendor | ST Microelectronics |
| RAM | 128KiB |
| Flash | 1MiB |
| Frequency | up to 80MHz |
| FPU | yes |
| Timers | 16 (2x watchdog, 1 SysTick, 6x 16-bit, 2x 32-bit [TIM2]) |
| ADCs | 3x 12-bit (up to 16 channels) |
| UARTs | 6 (three USARTs, two UARTs and one Low-Power UART) |
| SPIs | 3 |
| I2Cs | 3 |
| RTC | 1 |
| CAN | 1 |
| Vcc | 1.71 V - 3.6V |
| Datasheet | Datasheet |
| Reference Manual | Reference Manual |
| Programming Manual | Programming Manual |
| Board Manual | Board Manual |
A detailed description about the flashing process can be found on the
guides page.
The board name for the Nucleo-L476RG is nucleo-l476rg.