boards/nucleo-l011k4/doc.md
@defgroup boards_nucleo-l011k4 STM32 Nucleo-L011K4 @ingroup boards_common_nucleo32 @brief Support for the STM32 Nucleo-L011K4
The Nucleo-L011K4 is a board from ST's Nucleo family supporting ARM-Cortex-M0+ STM32L011K4 microcontroller with 2KiB of RAM and 16KiB of Flash.
You can find general information about the Nucleo32 boards on the @ref boards_common_nucleo32 page.
@image html pinouts/nucleo-l432kc-and-more.svg "Pinout for the Nucleo-L011K4 (from STM user manual, UM1956, https://www.st.com/resource/en/user_manual/um1956-stm32-nucleo32-boards-mb1180-stmicroelectronics.pdf, page 32)" width=25%
| MCU | STM32L011K4 |
|---|---|
| Family | ARM Cortex-M0+ |
| Vendor | ST Microelectronics |
| RAM | 2KiB |
| Flash | 16KiB |
| Frequency | up to 32MHz |
| FPU | no |
| Timers | 7 (3x 16-bit, 1x RTC, 1x Systick, 2x Watchdog) |
| ADC | 1x 12-bit (10 channels) |
| UARTs | 2 (one USART and one Low-Power UART) |
| SPIs | 1 |
| CANs | 0 |
| RTC | 1 |
| I2Cs | 1 |
| Vcc | 1.65V - 3.6V |
| Datasheet | Datasheet |
| Reference Manual | Reference Manual |
| Programming Manual | Programming Manual |
| Board Manual | Board Manual |
A detailed description about the flashing process can be found on the
guides page.
The board name for the Nucleo-L011K4 is nucleo-l011k4.