boards/nucleo-g474re/doc.md
@defgroup boards_nucleo-g474re STM32 Nucleo-G474RE @ingroup boards_common_nucleo64 @brief Support for the STM32 Nucleo-G474RE
The Nucleo-G474RE is a board from ST's Nucleo family supporting a ARM Cortex-M4 STM32G474RE microcontroller with 128KiB of RAM and 512KiB of Flash.
You can find general information about the Nucleo64 boards on the @ref boards_common_nucleo64 page.
@image html pinouts/nucleo-g431rb-and-more.svg "Pinout for the Nucleo-G4741RE (from STM user manual UM2505, https://www.st.com/resource/en/user_manual/um2505-stm32g4-nucleo64-boards-mb1367-stmicroelectronics.pdf, page 29)" width=50%
| MCU | STM32G474RE |
|---|---|
| Family | ARM Cortex-M4 |
| Vendor | ST Microelectronics |
| RAM | 128KiB |
| Flash | 512KiB |
| Frequency | up to 170 MHz |
| Timers | 17 (2x watchdog, 1 SysTick, 12x 16-bit and 2x 32-bit) |
| ADCs | 5x 12 bit (up to 26 channels) |
| UARTs | 5 (one UART, three USARTs and one Low-Power UART) |
| I2Cs | 4 |
| SPIs | 3 |
| CANs | 3 |
| RTC | 1 |
| Datasheet | Datasheet |
| Reference Manual | Reference Manual |
| Programming Manual | Programming Manual |
| Board Manual | Board Manual |
A detailed description about the flashing process can be found on the
guides page.
The board name for the Nucleo-G474RE is nucleo-g474re.