Doc

@defgroup boards_arduino-nano-33-ble Arduino Nano 33 BLE @ingroup boards @brief Support for the Arduino Nano 33 BLE

General information

The Arduino Nano 33 BLE board is an opensource, micro development kit using the nRF52840 SoC. This board provides 802.15.4 and BLE connectivity.

Pinout

Flash the board

Use BOARD=arduino-nano-33-ble with the make command.

Example with hello-world application:

    make BOARD=arduino-nano-33-ble -C examples/basic/hello-world flash

Accessing STDIO via UART

The STDIO is directly accessible via the USB port. On a Linux host, it's generally mapped to /dev/ttyACM0.

Use the term target to connect to the board serial port

    make BOARD=arduino-nano-33-ble -C examples/basic/hello-world term