Documentation/admin-guide/mm/damon/usage.rst
.. SPDX-License-Identifier: GPL-2.0
DAMON provides below interfaces for different users.
This <https://github.com/damonitor/damo>_ is for privileged people such as
system administrators who want a just-working human-friendly interface.
Using this, users can use the DAMON’s major features in a human-friendly way.
It may not be highly tuned for special cases, though. For more detail,
please refer to its usage document <https://github.com/damonitor/damo/blob/next/USAGE.md>_.This <sysfs_interface> is for privileged user space programmers who
want more optimized use of DAMON. Using this, users can use DAMON’s major
features by reading from and writing to special sysfs files. Therefore,
you can write and use your personalized DAMON sysfs wrapper programs that
reads/writes the sysfs files instead of you. The DAMON user space tool <https://github.com/damonitor/damo>_ is one example of such programs.This </mm/damon/api> is for kernel space programmers. Using this,
users can utilize every feature of DAMON most flexibly and efficiently by
writing kernel space DAMON application programs for you. You can even extend
DAMON for various address spaces. For detail, please refer to the interface
:doc:document </mm/damon/api>.This <debugfs_interface> is almost identical to :ref:sysfs interface <sysfs_interface>. This is deprecated, so users should move to the
:ref:sysfs interface <sysfs_interface>. If you depend on this and cannot
move, please report your usecase to [email protected] and
[email protected]... _sysfs_interface:
DAMON sysfs interface is built when CONFIG_DAMON_SYSFS is defined. It
creates multiple directories and files under its sysfs directory,
<sysfs>/kernel/mm/damon/. You can control DAMON by writing to and reading
from the files under the directory.
For a short example, users can monitor the virtual address space of a given workload as below. ::
# cd /sys/kernel/mm/damon/admin/
# echo 1 > kdamonds/nr_kdamonds && echo 1 > kdamonds/0/contexts/nr_contexts
# echo vaddr > kdamonds/0/contexts/0/operations
# echo 1 > kdamonds/0/contexts/0/targets/nr_targets
# echo $(pidof <workload>) > kdamonds/0/contexts/0/targets/0/pid_target
# echo on > kdamonds/0/state
The files hierarchy of DAMON sysfs interface is shown below. In the below
figure, parents-children relations are represented with indentations, each
directory is having / suffix, and files in each directory are separated by
comma (",").
.. parsed-literal::
:ref:`/sys/kernel/mm/damon <sysfs_root>`/admin
│ :ref:`kdamonds <sysfs_kdamonds>`/nr_kdamonds
│ │ :ref:`0 <sysfs_kdamond>`/state,pid
│ │ │ :ref:`contexts <sysfs_contexts>`/nr_contexts
│ │ │ │ :ref:`0 <sysfs_context>`/avail_operations,operations
│ │ │ │ │ :ref:`monitoring_attrs <sysfs_monitoring_attrs>`/
│ │ │ │ │ │ intervals/sample_us,aggr_us,update_us
│ │ │ │ │ │ nr_regions/min,max
│ │ │ │ │ :ref:`targets <sysfs_targets>`/nr_targets
│ │ │ │ │ │ :ref:`0 <sysfs_target>`/pid_target
│ │ │ │ │ │ │ :ref:`regions <sysfs_regions>`/nr_regions
│ │ │ │ │ │ │ │ :ref:`0 <sysfs_region>`/start,end
│ │ │ │ │ │ │ │ ...
│ │ │ │ │ │ ...
│ │ │ │ │ :ref:`schemes <sysfs_schemes>`/nr_schemes
│ │ │ │ │ │ :ref:`0 <sysfs_scheme>`/action,target_nid,apply_interval_us
│ │ │ │ │ │ │ :ref:`access_pattern <sysfs_access_pattern>`/
│ │ │ │ │ │ │ │ sz/min,max
│ │ │ │ │ │ │ │ nr_accesses/min,max
│ │ │ │ │ │ │ │ age/min,max
│ │ │ │ │ │ │ :ref:`quotas <sysfs_quotas>`/ms,bytes,reset_interval_ms,effective_bytes
│ │ │ │ │ │ │ │ weights/sz_permil,nr_accesses_permil,age_permil
│ │ │ │ │ │ │ │ :ref:`goals <sysfs_schemes_quota_goals>`/nr_goals
│ │ │ │ │ │ │ │ │ 0/target_metric,target_value,current_value
│ │ │ │ │ │ │ :ref:`watermarks <sysfs_watermarks>`/metric,interval_us,high,mid,low
│ │ │ │ │ │ │ :ref:`filters <sysfs_filters>`/nr_filters
│ │ │ │ │ │ │ │ 0/type,matching,memcg_id
│ │ │ │ │ │ │ :ref:`stats <sysfs_schemes_stats>`/nr_tried,sz_tried,nr_applied,sz_applied,qt_exceeds
│ │ │ │ │ │ │ :ref:`tried_regions <sysfs_schemes_tried_regions>`/total_bytes
│ │ │ │ │ │ │ │ 0/start,end,nr_accesses,age
│ │ │ │ │ │ │ │ ...
│ │ │ │ │ │ ...
│ │ │ │ ...
│ │ ...
.. _sysfs_root:
The root of the DAMON sysfs interface is <sysfs>/kernel/mm/damon/, and it
has one directory named admin. The directory contains the files for
privileged user space programs' control of DAMON. User space tools or daemons
having the root permission could use this directory.
.. _sysfs_kdamonds:
Under the admin directory, one directory, kdamonds, which has files for
controlling the kdamonds (refer to
:ref:design <damon_design_execution_model_and_data_structures> for more
details) exists. In the beginning, this directory has only one file,
nr_kdamonds. Writing a number (N) to the file creates the number of
child directories named 0 to N-1. Each directory represents each
kdamond.
.. _sysfs_kdamond:
In each kdamond directory, two files (state and pid) and one directory
(contexts) exist.
Reading state returns on if the kdamond is currently running, or
off if it is not running.
Users can write below commands for the kdamond to the state file.
on: Start running.off: Stop running.commit: Read the user inputs in the sysfs files except state file
again.commit_schemes_quota_goals: Read the DAMON-based operation schemes'
:ref:quota goals <sysfs_schemes_quota_goals>.update_schemes_stats: Update the contents of stats files for each
DAMON-based operation scheme of the kdamond. For details of the stats,
please refer to :ref:stats section <sysfs_schemes_stats>.update_schemes_tried_regions: Update the DAMON-based operation scheme
action tried regions directory for each DAMON-based operation scheme of the
kdamond. For details of the DAMON-based operation scheme action tried
regions directory, please refer to
:ref:tried_regions section <sysfs_schemes_tried_regions>.update_schemes_tried_bytes: Update only .../tried_regions/total_bytes
files.clear_schemes_tried_regions: Clear the DAMON-based operating scheme
action tried regions directory for each DAMON-based operation scheme of the
kdamond.update_schemes_effective_quotas: Update the contents of
effective_bytes files for each DAMON-based operation scheme of the
kdamond. For more details, refer to :ref:quotas directory <sysfs_quotas>.If the state is on, reading pid shows the pid of the kdamond thread.
contexts directory contains files for controlling the monitoring contexts
that this kdamond will execute.
.. _sysfs_contexts:
In the beginning, this directory has only one file, nr_contexts. Writing a
number (N) to the file creates the number of child directories named as
0 to N-1. Each directory represents each monitoring context (refer to
:ref:design <damon_design_execution_model_and_data_structures> for more
details). At the moment, only one context per kdamond is supported, so only
0 or 1 can be written to the file.
.. _sysfs_context:
In each context directory, two files (avail_operations and operations)
and three directories (monitoring_attrs, targets, and schemes)
exist.
DAMON supports multiple types of :ref:monitoring operations <damon_design_configurable_operations_set>, including those for virtual address
space and the physical address space. You can get the list of available
monitoring operations set on the currently running kernel by reading
avail_operations file. Based on the kernel configuration, the file will
list different available operation sets. Please refer to the :ref:design <damon_operations_set> for the list of all available operation sets and their
brief explanations.
You can set and get what type of monitoring operations DAMON will use for the
context by writing one of the keywords listed in avail_operations file and
reading from the operations file.
.. _sysfs_monitoring_attrs:
Files for specifying attributes of the monitoring including required quality
and efficiency of the monitoring are in monitoring_attrs directory.
Specifically, two directories, intervals and nr_regions exist in this
directory.
Under intervals directory, three files for DAMON's sampling interval
(sample_us), aggregation interval (aggr_us), and update interval
(update_us) exist. You can set and get the values in micro-seconds by
writing to and reading from the files.
Under nr_regions directory, two files for the lower-bound and upper-bound
of DAMON's monitoring regions (min and max, respectively), which
controls the monitoring overhead, exist. You can set and get the values by
writing to and rading from the files.
For more details about the intervals and monitoring regions range, please refer
to the Design document (:doc:/mm/damon/design).
.. _sysfs_targets:
In the beginning, this directory has only one file, nr_targets. Writing a
number (N) to the file creates the number of child directories named 0
to N-1. Each directory represents each monitoring target.
.. _sysfs_target:
In each target directory, one file (pid_target) and one directory
(regions) exist.
If you wrote vaddr to the contexts/<N>/operations, each target should
be a process. You can specify the process to DAMON by writing the pid of the
process to the pid_target file.
.. _sysfs_regions:
In case of fvaddr or paddr monitoring operations sets, users are
required to set the monitoring target address ranges. In case of vaddr
operations set, it is not mandatory, but users can optionally set the initial
monitoring region to specific address ranges. Please refer to the :ref:design <damon_design_vaddr_target_regions_construction> for more details.
For such cases, users can explicitly set the initial monitoring target regions as they want, by writing proper values to the files under this directory.
In the beginning, this directory has only one file, nr_regions. Writing a
number (N) to the file creates the number of child directories named 0
to N-1. Each directory represents each initial monitoring target region.
.. _sysfs_region:
In each region directory, you will find two files (start and end). You
can set and get the start and end addresses of the initial monitoring target
region by writing to and reading from the files, respectively.
Each region should not overlap with others. end of directory N should
be equal or smaller than start of directory N+1.
.. _sysfs_schemes:
The directory for DAMON-based Operation Schemes (:ref:DAMOS <damon_design_damos>). Users can get and set the schemes by reading from and
writing to files under this directory.
In the beginning, this directory has only one file, nr_schemes. Writing a
number (N) to the file creates the number of child directories named 0
to N-1. Each directory represents each DAMON-based operation scheme.
.. _sysfs_scheme:
In each scheme directory, five directories (access_pattern, quotas,
watermarks, filters, stats, and tried_regions) and three files
(action, target_nid and apply_interval) exist.
The action file is for setting and getting the scheme's :ref:action <damon_design_damos_action>. The keywords that can be written to and read
from the file and their meaning are same to those of the list on
:ref:design doc <damon_design_damos_action>.
The target_nid file is for setting the migration target node, which is
only meaningful when the action is either migrate_hot or
migrate_cold.
The apply_interval_us file is for setting and getting the scheme's
:ref:apply_interval <damon_design_damos> in microseconds.
.. _sysfs_access_pattern:
The directory for the target access :ref:pattern <damon_design_damos_access_pattern> of the given DAMON-based operation scheme.
Under the access_pattern directory, three directories (sz,
nr_accesses, and age) each having two files (min and max)
exist. You can set and get the access pattern for the given scheme by writing
to and reading from the min and max files under sz,
nr_accesses, and age directories, respectively. Note that the min
and the max form a closed interval.
.. _sysfs_quotas:
The directory for the :ref:quotas <damon_design_damos_quotas> of the given
DAMON-based operation scheme.
Under quotas directory, four files (ms, bytes,
reset_interval_ms, effective_bytes) and two directores (weights and
goals) exist.
You can set the time quota in milliseconds, size quota in bytes, and
reset interval in milliseconds by writing the values to the three files,
respectively. Then, DAMON tries to use only up to time quota milliseconds
for applying the action to memory regions of the access_pattern, and to
apply the action to only up to bytes bytes of memory regions within the
reset_interval_ms. Setting both ms and bytes zero disables the
quota limits unless at least one :ref:goal <sysfs_schemes_quota_goals> is
set.
The time quota is internally transformed to a size quota. Between the
transformed size quota and user-specified size quota, smaller one is applied.
Based on the user-specified :ref:goal <sysfs_schemes_quota_goals>, the
effective size quota is further adjusted. Reading effective_bytes returns
the current effective size quota. The file is not updated in real time, so
users should ask DAMON sysfs interface to update the content of the file for
the stats by writing a special keyword, update_schemes_effective_quotas to
the relevant kdamonds/<N>/state file.
Under weights directory, three files (sz_permil,
nr_accesses_permil, and age_permil) exist.
You can set the :ref:prioritization weights <damon_design_damos_quotas_prioritization> for size, access frequency, and age
in per-thousand unit by writing the values to the three files under the
weights directory.
.. _sysfs_schemes_quota_goals:
The directory for the :ref:automatic quota tuning goals <damon_design_damos_quotas_auto_tuning> of the given DAMON-based operation
scheme.
In the beginning, this directory has only one file, nr_goals. Writing a
number (N) to the file creates the number of child directories named 0
to N-1. Each directory represents each goal and current achievement.
Among the multiple feedback, the best one is used.
Each goal directory contains three files, namely target_metric,
target_value and current_value. Users can set and get the three
parameters for the quota auto-tuning goals that specified on the :ref:design doc <damon_design_damos_quotas_auto_tuning> by writing to and reading from each
of the files. Note that users should further write
commit_schemes_quota_goals to the state file of the :ref:kdamond directory <sysfs_kdamond> to pass the feedback to DAMON.
.. _sysfs_watermarks:
The directory for the :ref:watermarks <damon_design_damos_watermarks> of the
given DAMON-based operation scheme.
Under the watermarks directory, five files (metric, interval_us,
high, mid, and low) for setting the metric, the time interval
between check of the metric, and the three watermarks exist. You can set and
get the five values by writing to the files, respectively.
Keywords and meanings of those that can be written to the metric file are
as below.
The interval should written in microseconds unit.
.. _sysfs_filters:
The directory for the :ref:filters <damon_design_damos_filters> of the given
DAMON-based operation scheme.
In the beginning, this directory has only one file, nr_filters. Writing a
number (N) to the file creates the number of child directories named 0
to N-1. Each directory represents each filter. The filters are evaluated
in the numeric order.
Each filter directory contains six files, namely type, matcing,
memcg_path, addr_start, addr_end, and target_idx. To type
file, you can write one of five special keywords: anon for anonymous pages,
memcg for specific memory cgroup, young for young pages, addr for
specific address range (an open-ended interval), or target for specific
DAMON monitoring target filtering. In case of the memory cgroup filtering, you
can specify the memory cgroup of the interest by writing the path of the memory
cgroup from the cgroups mount point to memcg_path file. In case of the
address range filtering, you can specify the start and end address of the range
to addr_start and addr_end files, respectively. For the DAMON
monitoring target filtering, you can specify the index of the target between
the list of the DAMON context's monitoring targets list to target_idx file.
You can write Y or N to matching file to filter out pages that does
or does not match to the type, respectively. Then, the scheme's action will
not be applied to the pages that specified to be filtered out.
For example, below restricts a DAMOS action to be applied to only non-anonymous
pages of all memory cgroups except /having_care_already.::
# echo 2 > nr_filters
# # filter out anonymous pages
echo anon > 0/type
echo Y > 0/matching
# # further filter out all cgroups except one at '/having_care_already'
echo memcg > 1/type
echo /having_care_already > 1/memcg_path
echo Y > 1/matching
Note that anon and memcg filters are currently supported only when
paddr :ref:implementation <sysfs_context> is being used.
Also, memory regions that are filtered out by addr or target filters
are not counted as the scheme has tried to those, while regions that filtered
out by other type filters are counted as the scheme has tried to. The
difference is applied to :ref:stats <damos_stats> and
:ref:tried regions <sysfs_schemes_tried_regions>.
.. _sysfs_schemes_stats:
DAMON counts the total number and bytes of regions that each scheme is tried to be applied, the two numbers for the regions that each scheme is successfully applied, and the total number of the quota limit exceeds. This statistics can be used for online analysis or tuning of the schemes.
The statistics can be retrieved by reading the files under stats directory
(nr_tried, sz_tried, nr_applied, sz_applied, and
qt_exceeds), respectively. The files are not updated in real time, so you
should ask DAMON sysfs interface to update the content of the files for the
stats by writing a special keyword, update_schemes_stats to the relevant
kdamonds/<N>/state file.
.. _sysfs_schemes_tried_regions:
This directory initially has one file, total_bytes.
When a special keyword, update_schemes_tried_regions, is written to the
relevant kdamonds/<N>/state file, DAMON updates the total_bytes file so
that reading it returns the total size of the scheme tried regions, and creates
directories named integer starting from 0 under this directory. Each
directory contains files exposing detailed information about each of the memory
region that the corresponding scheme's action has tried to be applied under
this directory, during next :ref:apply interval <damon_design_damos> of the
corresponding scheme. The information includes address range, nr_accesses,
and age of the region.
Writing update_schemes_tried_bytes to the relevant kdamonds/<N>/state
file will only update the total_bytes file, and will not create the
subdirectories.
The directories will be removed when another special keyword,
clear_schemes_tried_regions, is written to the relevant
kdamonds/<N>/state file.
The expected usage of this directory is investigations of schemes' behaviors,
and query-like efficient data access monitoring results retrievals. For the
latter use case, in particular, users can set the action as stat and
set the access pattern as their interested pattern that they want to query.
.. _sysfs_schemes_tried_region:
In each region directory, you will find four files (start, end,
nr_accesses, and age). Reading the files will show the start and end
addresses, nr_accesses, and age of the region that corresponding
DAMON-based operation scheme action has tried to be applied.
Example
Below commands applies a scheme saying "If a memory region of size in [4KiB,
8KiB] is showing accesses per aggregate interval in [0, 5] for aggregate
interval in [10, 20], page out the region. For the paging out, use only up to
10ms per second, and also don't page out more than 1GiB per second. Under the
limitation, page out memory regions having longer age first. Also, check the
free memory rate of the system every 5 seconds, start the monitoring and paging
out when the free memory rate becomes lower than 50%, but stop it if the free
memory rate becomes larger than 60%, or lower than 30%". ::
# cd <sysfs>/kernel/mm/damon/admin
# # populate directories
# echo 1 > kdamonds/nr_kdamonds; echo 1 > kdamonds/0/contexts/nr_contexts;
# echo 1 > kdamonds/0/contexts/0/schemes/nr_schemes
# cd kdamonds/0/contexts/0/schemes/0
# # set the basic access pattern and the action
# echo 4096 > access_pattern/sz/min
# echo 8192 > access_pattern/sz/max
# echo 0 > access_pattern/nr_accesses/min
# echo 5 > access_pattern/nr_accesses/max
# echo 10 > access_pattern/age/min
# echo 20 > access_pattern/age/max
# echo pageout > action
# # set quotas
# echo 10 > quotas/ms
# echo $((1024*1024*1024)) > quotas/bytes
# echo 1000 > quotas/reset_interval_ms
# # set watermark
# echo free_mem_rate > watermarks/metric
# echo 5000000 > watermarks/interval_us
# echo 600 > watermarks/high
# echo 500 > watermarks/mid
# echo 300 > watermarks/low
Please note that it's highly recommended to use user space tools like `damo
<https://github.com/damonitor/damo>`_ rather than manually reading and writing
the files as above. Above is only for an example.
.. _tracepoint:
Tracepoints for Monitoring Results
==================================
Users can get the monitoring results via the :ref:`tried_regions
<sysfs_schemes_tried_regions>`. The interface is useful for getting a
snapshot, but it could be inefficient for fully recording all the monitoring
results. For the purpose, two trace points, namely ``damon:damon_aggregated``
and ``damon:damos_before_apply``, are provided. ``damon:damon_aggregated``
provides the whole monitoring results, while ``damon:damos_before_apply``
provides the monitoring results for regions that each DAMON-based Operation
Scheme (:ref:`DAMOS <damon_design_damos>`) is gonna be applied. Hence,
``damon:damos_before_apply`` is more useful for recording internal behavior of
DAMOS, or DAMOS target access
:ref:`pattern <damon_design_damos_access_pattern>` based query-like efficient
monitoring results recording.
While the monitoring is turned on, you could record the tracepoint events and
show results using tracepoint supporting tools like ``perf``. For example::
# echo on > kdamonds/0/state
# perf record -e damon:damon_aggregated &
# sleep 5
# kill 9 $(pidof perf)
# echo off > kdamonds/0/state
# perf script
kdamond.0 46568 [027] 79357.842179: damon:damon_aggregated: target_id=0 nr_regions=11 122509119488-135708762112: 0 864
[...]
Each line of the perf script output represents each monitoring region. The
first five fields are as usual other tracepoint outputs. The sixth field
(``target_id=X``) shows the ide of the monitoring target of the region. The
seventh field (``nr_regions=X``) shows the total number of monitoring regions
for the target. The eighth field (``X-Y:``) shows the start (``X``) and end
(``Y``) addresses of the region in bytes. The ninth field (``X``) shows the
``nr_accesses`` of the region (refer to
:ref:`design <damon_design_region_based_sampling>` for more details of the
counter). Finally the tenth field (``X``) shows the ``age`` of the region
(refer to :ref:`design <damon_design_age_tracking>` for more details of the
counter).
If the event was ``damon:damos_beofre_apply``, the ``perf script`` output would
be somewhat like below::
kdamond.0 47293 [000] 80801.060214: damon:damos_before_apply: ctx_idx=0 scheme_idx=0 target_idx=0 nr_regions=11 121932607488-135128711168: 0 136
[...]
Each line of the output represents each monitoring region that each DAMON-based
Operation Scheme was about to be applied at the traced time. The first five
fields are as usual. It shows the index of the DAMON context (``ctx_idx=X``)
of the scheme in the list of the contexts of the context's kdamond, the index
of the scheme (``scheme_idx=X``) in the list of the schemes of the context, in
addition to the output of ``damon_aggregated`` tracepoint.
.. _debugfs_interface:
debugfs Interface (DEPRECATED!)
===============================
.. note::
THIS IS DEPRECATED!
DAMON debugfs interface is deprecated, so users should move to the
:ref:`sysfs interface <sysfs_interface>`. If you depend on this and cannot
move, please report your usecase to [email protected] and
[email protected].
DAMON exports nine files, ``DEPRECATED``, ``attrs``, ``target_ids``,
``init_regions``, ``schemes``, ``monitor_on_DEPRECATED``, ``kdamond_pid``,
``mk_contexts`` and ``rm_contexts`` under its debugfs directory,
``<debugfs>/damon/``.
``DEPRECATED`` is a read-only file for the DAMON debugfs interface deprecation
notice. Reading it returns the deprecation notice, as below::
# cat DEPRECATED
DAMON debugfs interface is deprecated, so users should move to DAMON_SYSFS. If you cannot, please report your usecase to [email protected] and [email protected].
Attributes
----------
Users can get and set the ``sampling interval``, ``aggregation interval``,
``update interval``, and min/max number of monitoring target regions by
reading from and writing to the ``attrs`` file. To know about the monitoring
attributes in detail, please refer to the :doc:`/mm/damon/design`. For
example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10 and
1000, and then check it again::
# cd <debugfs>/damon
# echo 5000 100000 1000000 10 1000 > attrs
# cat attrs
5000 100000 1000000 10 1000
Target IDs
----------
Some types of address spaces supports multiple monitoring target. For example,
the virtual memory address spaces monitoring can have multiple processes as the
monitoring targets. Users can set the targets by writing relevant id values of
the targets to, and get the ids of the current targets by reading from the
``target_ids`` file. In case of the virtual address spaces monitoring, the
values should be pids of the monitoring target processes. For example, below
commands set processes having pids 42 and 4242 as the monitoring targets and
check it again::
# cd <debugfs>/damon
# echo 42 4242 > target_ids
# cat target_ids
42 4242
Users can also monitor the physical memory address space of the system by
writing a special keyword, "``paddr\n``" to the file. Because physical address
space monitoring doesn't support multiple targets, reading the file will show a
fake value, ``42``, as below::
# cd <debugfs>/damon
# echo paddr > target_ids
# cat target_ids
42
Note that setting the target ids doesn't start the monitoring.
Initial Monitoring Target Regions
---------------------------------
In case of the virtual address space monitoring, DAMON automatically sets and
updates the monitoring target regions so that entire memory mappings of target
processes can be covered. However, users can want to limit the monitoring
region to specific address ranges, such as the heap, the stack, or specific
file-mapped area. Or, some users can know the initial access pattern of their
workloads and therefore want to set optimal initial regions for the 'adaptive
regions adjustment'.
In contrast, DAMON do not automatically sets and updates the monitoring target
regions in case of physical memory monitoring. Therefore, users should set the
monitoring target regions by themselves.
In such cases, users can explicitly set the initial monitoring target regions
as they want, by writing proper values to the ``init_regions`` file. The input
should be a sequence of three integers separated by white spaces that represent
one region in below form.::
<target idx> <start address> <end address>
The ``target idx`` should be the index of the target in ``target_ids`` file,
starting from ``0``, and the regions should be passed in address order. For
example, below commands will set a couple of address ranges, ``1-100`` and
``100-200`` as the initial monitoring target region of pid 42, which is the
first one (index ``0``) in ``target_ids``, and another couple of address
ranges, ``20-40`` and ``50-100`` as that of pid 4242, which is the second one
(index ``1``) in ``target_ids``.::
# cd <debugfs>/damon
# cat target_ids
42 4242
# echo "0 1 100 \
0 100 200 \
1 20 40 \
1 50 100" > init_regions
Note that this sets the initial monitoring target regions only. In case of
virtual memory monitoring, DAMON will automatically updates the boundary of the
regions after one ``update interval``. Therefore, users should set the
``update interval`` large enough in this case, if they don't want the
update.
Schemes
-------
Users can get and set the DAMON-based operation :ref:`schemes
<damon_design_damos>` by reading from and writing to ``schemes`` debugfs file.
Reading the file also shows the statistics of each scheme. To the file, each
of the schemes should be represented in each line in below form::
<target access pattern> <action> <quota> <watermarks>
You can disable schemes by simply writing an empty string to the file.
Target Access Pattern
The target access :ref:pattern <damon_design_damos_access_pattern> of the
scheme. The <target access pattern> is constructed with three ranges in
below form::
min-size max-size min-acc max-acc min-age max-age
Specifically, bytes for the size of regions (min-size and max-size),
number of monitored accesses per aggregate interval for access frequency
(min-acc and max-acc), number of aggregate intervals for the age of
regions (min-age and max-age) are specified. Note that the ranges are
closed interval.
Action
The ``<action>`` is a predefined integer for memory management :ref:`actions
<damon_design_damos_action>`. The mapping between the ``<action>`` values and
the memory management actions is as below. For the detailed meaning of the
action and DAMON operations set supporting each action, please refer to the
list on :ref:`design doc <damon_design_damos_action>`.
- 0: ``willneed``
- 1: ``cold``
- 2: ``pageout``
- 3: ``hugepage``
- 4: ``nohugepage``
- 5: ``stat``
Quota
~~~~~
Users can set the :ref:`quotas <damon_design_damos_quotas>` of the given scheme
via the ``<quota>`` in below form::
<ms> <sz> <reset interval> <priority weights>
This makes DAMON to try to use only up to ``<ms>`` milliseconds for applying
the action to memory regions of the ``target access pattern`` within the
``<reset interval>`` milliseconds, and to apply the action to only up to
``<sz>`` bytes of memory regions within the ``<reset interval>``. Setting both
``<ms>`` and ``<sz>`` zero disables the quota limits.
For the :ref:`prioritization <damon_design_damos_quotas_prioritization>`, users
can set the weights for the three properties in ``<priority weights>`` in below
form::
<size weight> <access frequency weight> <age weight>
Watermarks
Users can specify :ref:watermarks <damon_design_damos_watermarks> of the
given scheme via <watermarks> in below form::
<metric> <check interval> <high mark> <middle mark> <low mark>
<metric> is a predefined integer for the metric to be checked. The
supported numbers and their meanings are as below.
The value of the metric is checked every <check interval> microseconds.
If the value is higher than <high mark> or lower than <low mark>, the
scheme is deactivated. If the value is lower than <mid mark>, the scheme
is activated.
.. _damos_stats:
Statistics
It also counts the total number and bytes of regions that each scheme is tried
to be applied, the two numbers for the regions that each scheme is successfully
applied, and the total number of the quota limit exceeds. This statistics can
be used for online analysis or tuning of the schemes.
The statistics can be shown by reading the ``schemes`` file. Reading the file
will show each scheme you entered in each line, and the five numbers for the
statistics will be added at the end of each line.
Example
~~~~~~~
Below commands applies a scheme saying "If a memory region of size in [4KiB,
8KiB] is showing accesses per aggregate interval in [0, 5] for aggregate
interval in [10, 20], page out the region. For the paging out, use only up to
10ms per second, and also don't page out more than 1GiB per second. Under the
limitation, page out memory regions having longer age first. Also, check the
free memory rate of the system every 5 seconds, start the monitoring and paging
out when the free memory rate becomes lower than 50%, but stop it if the free
memory rate becomes larger than 60%, or lower than 30%".::
# cd <debugfs>/damon
# scheme="4096 8192 0 5 10 20 2" # target access pattern and action
# scheme+=" 10 $((1024*1024*1024)) 1000" # quotas
# scheme+=" 0 0 100" # prioritization weights
# scheme+=" 1 5000000 600 500 300" # watermarks
# echo "$scheme" > schemes
Turning On/Off
--------------
Setting the files as described above doesn't incur effect unless you explicitly
start the monitoring. You can start, stop, and check the current status of the
monitoring by writing to and reading from the ``monitor_on_DEPRECATED`` file.
Writing ``on`` to the file starts the monitoring of the targets with the
attributes. Writing ``off`` to the file stops those. DAMON also stops if
every target process is terminated. Below example commands turn on, off, and
check the status of DAMON::
# cd <debugfs>/damon
# echo on > monitor_on_DEPRECATED
# echo off > monitor_on_DEPRECATED
# cat monitor_on_DEPRECATED
off
Please note that you cannot write to the above-mentioned debugfs files while
the monitoring is turned on. If you write to the files while DAMON is running,
an error code such as ``-EBUSY`` will be returned.
Monitoring Thread PID
---------------------
DAMON does requested monitoring with a kernel thread called ``kdamond``. You
can get the pid of the thread by reading the ``kdamond_pid`` file. When the
monitoring is turned off, reading the file returns ``none``. ::
# cd <debugfs>/damon
# cat monitor_on_DEPRECATED
off
# cat kdamond_pid
none
# echo on > monitor_on_DEPRECATED
# cat kdamond_pid
18594
Using Multiple Monitoring Threads
---------------------------------
One ``kdamond`` thread is created for each monitoring context. You can create
and remove monitoring contexts for multiple ``kdamond`` required use case using
the ``mk_contexts`` and ``rm_contexts`` files.
Writing the name of the new context to the ``mk_contexts`` file creates a
directory of the name on the DAMON debugfs directory. The directory will have
DAMON debugfs files for the context. ::
# cd <debugfs>/damon
# ls foo
# ls: cannot access 'foo': No such file or directory
# echo foo > mk_contexts
# ls foo
# attrs init_regions kdamond_pid schemes target_ids
If the context is not needed anymore, you can remove it and the corresponding
directory by putting the name of the context to the ``rm_contexts`` file. ::
# echo foo > rm_contexts
# ls foo
# ls: cannot access 'foo': No such file or directory
Note that ``mk_contexts``, ``rm_contexts``, and ``monitor_on_DEPRECATED`` files
are in the root directory only.