LLM Request Timing Decomposition Design (P3 Phase 4)

Issue #3731 — Phase 4 of hierarchical session tracing. Adds time-to-first-token, request-setup duration, sampling duration, and per-attempt retry telemetry to the qwen-code.llm_request span so operators can answer "why was this LLM call slow?" without guessing.

Builds on Phase 1 (#4126), Phase 1.5 (#4302), Phase 2 (#4321). Independent of Phase 3 (#4410, in review) — recommended to land Phase 3 first so Phase 4's per-attempt fields aggregate cleanly under subagent subtrees.

Problem

qwen-code.llm_request spans today carry only model, prompt_id, input_tokens, output_tokens, success, error, duration_ms. Operators reading a single trace cannot tell:

1. How much of duration_ms was the model thinking vs the network setup. A 12-second duration_ms could be 11s of retries followed by 1s of fast generation, or 100ms of setup followed by 12s of slow streaming — the trace doesn't say.
2. When the user saw the first token. TTFT (time-to-first-token) is the standard latency SLO for chat UIs. We can't compute it; we don't capture it.
3. What happened during retries. retryWithBackoff (utils/retry.ts:285) only calls debugLogger.warn — no OTel event, no span attribute. The 4 LLM call sites that go through it (client.ts:1540, baseLlmClient.ts:193,282, geminiChat.ts:1039) have zero retry visibility in traces or metrics. ContentRetryEvent exists for content-recovery retries inside geminiChat.ts:806,830 but not for the more common rate-limit / 5xx retries.
4. That api.request.breakdown is dead code. The metric is defined at metrics.ts:242-251 with 4 ApiRequestPhase values, exported from index.ts:117, tested in metrics.test.ts:646-675 — but recordApiRequestBreakdown() has zero callers in production code. The metric infrastructure is paid for; the data flow was never connected.

These gaps make qwen-code.llm_request the least informative span in the trace tree. Tool spans (#4126/#4321) and subagent spans (#4410) both surface lifecycle phases; LLM spans collapse the entire request into one opaque duration.

Existing surface (no change)

Out-of-scope (deferred)

• SDK-level retries (openai SDK maxRetries=3, google-genai SDK internal retries). These happen entirely inside the third-party SDK; observing them requires disabling SDK retries and reimplementing in retryWithBackoff. Separate decision, not Phase 4.
• Per-token streaming metrics (inter-token latency, per-chunk size). Useful for inference-engine perf debugging, not for the user-perceived latency questions Phase 4 targets.
• Separate TTFT for reasoning/thinking blocks. "First token" includes thinking content (see D1). A future enhancement could split ttft_to_reasoning_ms vs ttft_to_answer_ms, but only after we know there's demand.
• Sampling phase as a dedicated child span. Computable from duration_ms - ttft_ms - request_setup_ms; child span adds nothing for OTel-only backends (claude-code uses one for Perfetto only). Stored as a span attribute instead — see D6.
• Persistent retry mode (QWEN_CODE_UNATTENDED_RETRY) event-level rate limiting. A single LLM request can produce 50+ ContentRetryEvent / ApiRetryEvent records under persistent retry. Capping emission is a follow-up — Phase 4 emits all events; if production volumes prove unbearable, add a per-span emission cap with a "+N more attempts (truncated)" summary event in a follow-up PR.
• TOKEN_PROCESSING breakdown phase. Enum value exists but qwen-code has no real post-stream local processing worth measuring (<10ms typical). Skipped in production callers; enum value retained for future use or for callers we don't control.
• Migrating ContentRetryEvent onto LLM span as span events. Same reasoning as Phase 3's subagent_execution LogRecord: existing consumers (qwen-logger RUM, future metrics) are tightly coupled to the LogRecord. Bridge-span coverage is good enough.

References (decision evidence)

Design — seven decisions, each justified

D1 — TTFT semantic: "first chunk containing user-visible content"

TTFT measures wall-clock from the successful attempt's request dispatch to the first stream chunk that contains user-visible output. A chunk is "user-visible" if any normalized Part in candidates[0].content.parts is one of:

• text with non-empty string
• functionCall (tool use)
• inlineData (image, binary)
• executableCode
• thought / reasoning content (whatever the provider surfaces — Gemini's thought, Anthropic's <thinking> block, OpenAI o1 reasoning chunk)

Chunks containing only role metadata or only usageMetadata (final usage-summary chunk) do not trigger TTFT.

Why not "first stream event of any kind" (claude-code's choice): claude-code measures TTFT at message_start, an Anthropic-specific metadata event that fires 50–300ms before any actual content. Their internal headlessProfiler.ts already separates time_to_first_response_ms for the "user saw something" semantic, acknowledging the distinction. qwen-code spans multiple providers (Anthropic, OpenAI, Gemini, Qwen) — picking the metadata-event semantic means TTFT for Anthropic is fundamentally different from TTFT for OpenAI (which has no analogous metadata-only first event). The user-visible-content semantic is uniform across all 4 providers and matches "time-to-first-token" literally.

Why include thought / reasoning: from the operator's perspective, reasoning chunks are still "the model produced output." Excluding them would understate TTFT for reasoning-heavy models (o1, Qwen thinking variants). Future split into ttft_to_reasoning_ms vs ttft_to_answer_ms is possible; not Phase 4.

Why include tool-call-only chunks: agent tool-decision LLM calls (one tool_use, no text) are common in qwen-code's workflow. Excluding them means TTFT is undefined for these requests. The functionCall Part is meaningful output.

Cross-product comparison note: design doc explicitly states qwen-code.ttft_ms ≈ claude-code.time_to_first_response_ms ≠ claude-code.ttft_ms. Operators comparing across products should align on the user-visible-content semantic.

D2 — TTFT measurement site: method-local variables in LoggingContentGenerator.generateContentStream

The first-chunk detection runs inside the existing stream wrapper at loggingContentGenerator.ts:393 (async function* processStreamGenerator). Per-call variables (start, ttftMs) live in the method's closure; never as instance fields.

Why never instance fields: LoggingContentGenerator is instantiated once per ContentGenerator (contentGenerator.ts:377) and shared across all concurrent generateContentStream calls — subagent fan-out, warmup queries, side-queries from geminiChat. An instance field would be overwritten across concurrent calls, producing nonsense TTFT for one of every two interleaved requests.

Why not AsyncLocalStorage: ALS would work but adds a context-management layer for a piece of state that doesn't need to escape the method. Method-local is simpler, zero overhead, zero risk of leakage.

// loggingContentGenerator.ts — inside generateContentStream
const attemptStart = Date.now(); // per-call local
const requestEntryTime = Date.now(); // also per-call local — see D3
let ttftMs: number | undefined;
const attemptStartTimes: number[] = [attemptStart];
let retryTotalDelayMs = 0;
let finalAttempt = 1;
// stream wrapper inspects each chunk; first one matching hasUserVisibleContent:
//   ttftMs = Date.now() - attemptStart;

hasUserVisibleContent(chunk) is a small standalone helper colocated with the wrapper, exported for tests:

function hasUserVisibleContent(chunk: GenerateContentResponse): boolean {
  const parts = chunk.candidates?.[0]?.content?.parts;
  if (!parts?.length) return false;
  return parts.some(
    (p) =>
      (typeof p.text === 'string' && p.text.length > 0) ||
      p.functionCall !== undefined ||
      p.inlineData !== undefined ||
      p.executableCode !== undefined ||
      // @ts-expect-error — `thought` is not on all SDK versions but providers emit it
      p.thought !== undefined,
  );
}

D3 — request_setup_ms computation: entry-time vs successful-attempt-start

request_setup_ms measures wall-clock from generateContentStream/generateContent entry to the start of the successful attempt — including all failed retries, backoff sleeps, and any pre-retry preparation work.

request_setup_ms = attemptStart_of_successful_attempt - requestEntryTime;

When attempt === 1 and no retries happened, request_setup_ms is small (just SDK setup). When retries occurred, it captures the entire retry-budget overhead.

Putting it on the OTel span (diverges from claude-code, which puts it only on Perfetto): rationale at three levels:

1. No Perfetto — qwen-code has no out-of-band visualization layer. OTel attributes are the only channel.
2. Single-trace debug — operator sees duration_ms=12000, request_setup_ms=11500, ttft_ms=200, sampling_ms=300 → instantly diagnoses "retries ate 11.5s, model itself was fast." Computing request_setup_ms from other fields requires also exposing sampling_ms, which we do anyway (D6).
3. Negligible cost — 1 INT64 attribute. Same order of magnitude as the existing input_tokens, output_tokens attributes. Backend ingest cost is not material.

D4 — Retry telemetry: onRetry callback option on retryWithBackoff + new ApiRetryEvent

retryWithBackoff currently calls logRetryAttempt (retry.ts:343) which only writes to debugLogger.warn. We extend the RetryOptions interface with an opt-in callback:

// utils/retry.ts
interface RetryOptions<T> {
  // ... existing fields ...
  /**
   * Optional. Called once per failed attempt, before the backoff sleep.
   * Receives the attempt number (1-based), the error, and the delay before
   * the next attempt. Use this to emit telemetry events for LLM call sites;
   * leave undefined for non-LLM callers (e.g., channels/weixin) so they
   * stay silent in LLM-specific telemetry channels.
   */
  onRetry?: (info: RetryAttemptInfo) => void;
}

interface RetryAttemptInfo {
  attempt: number; // 1-based, matches debugLogger output
  error: unknown;
  errorStatus?: number;
  delayMs: number; // backoff delay before next attempt
}

The 4 LLM call sites (client.ts:1540, baseLlmClient.ts:193,282, geminiChat.ts:1039) register a callback that emits a new ApiRetryEvent:

// types.ts — new event class, sibling to ContentRetryEvent
export class ApiRetryEvent implements BaseTelemetryEvent {
  'event.name': typeof EVENT_API_RETRY;
  'event.timestamp': string;
  model: string;
  prompt_id?: string;
  attempt_number: number; // 1-based
  error_type: string;
  error_message: string; // truncated to 256 chars
  status_code?: number;
  retry_delay_ms: number;
  // ... duration_ms set to retry_delay_ms so LogToSpanProcessor renders
  // a bridge span of meaningful width
  duration_ms: number;
}

Why a new event class, not extending ContentRetryEvent:

• ContentRetryEvent has 2 downstream consumers (qwen-logger, log-record export). Changing its payload risks breaking them.
• The naming "content retry" semantically refers to content-recovery retries (invalid stream, schema repair) — extending it to cover rate-limit retries would muddy the schema.
• New event is additive; no consumer surprise.

Why not embed callback IN retry.ts: retry.ts is called by channels/weixin/src/api.ts too (microsoft messaging API retries). Hard-coupling LLM telemetry inside retry.ts would emit ApiRetryEvent for non-LLM retries. The onRetry callback is opt-in per caller — LLM callers opt in, weixin caller doesn't.

ContentRetryEvent coexistence: ContentRetryEvent stays as-is for content-recovery retries inside geminiChat.ts:806,830. ApiRetryEvent covers the rate-limit / 5xx retries from retryWithBackoff. The two events fire from different layers and never duplicate. Existing log-bridge behavior for both events is preserved via LogToSpanProcessor — both events nest under the active LLM span automatically (Phase 1 wiring ensures the LLM span is active during retries).

Persistent retry mode (QWEN_CODE_UNATTENDED_RETRY): a single 429-loop request may emit 50+ events. Out of scope to rate-limit emission in Phase 4 — if production volumes prove unbearable, add a per-span cap with summary event in a follow-up PR. The aggregated attempt and retry_total_delay_ms on the parent LLM span (D5) remain accurate regardless of event cap.

D5 — Parent LLM span aggregation: scalar attributes only (no map-typed attrs)

OTel span attributes are scalars (string | number | boolean | array of these). Map-typed attributes (like retry_count_by_status: {429:2, 503:1}) require JSON serialization and are awkward to query. Skip them.

Per-attempt status-code distribution (e.g., "2 of the 3 attempts were 429s") is queryable from log-bridge spans of ApiRetryEvent records. No need to duplicate it as a flattened attribute on the parent.

Why sampling_ms and output_tokens_per_second on the span: derivable but cumbersome to compute in backend queries when summing across many spans. Same cost-benefit as request_setup_ms (D3).

D6 — Activate recordApiRequestBreakdown() for 3 of 4 phases

In endLLMRequestSpan (or the wrapper that calls it), after computing TTFT/setup/sampling, emit:

recordApiRequestBreakdown(config, model, [
  { phase: ApiRequestPhase.REQUEST_PREPARATION, durationMs: requestSetupMs },
  { phase: ApiRequestPhase.NETWORK_LATENCY, durationMs: ttftMs }, // ttftMs = network + first-token-generation
  { phase: ApiRequestPhase.RESPONSE_PROCESSING, durationMs: samplingMs },
]);

Why skip TOKEN_PROCESSING: qwen-code does stream chunk processing inline (consolidation happens in the wrapper at loggingContentGenerator.ts:644); the post-stream wrap-up phase is <10ms and not architecturally distinct. Filling it with a meaningless value pollutes the histogram. Leaving the enum value unused is safe — apiRequestBreakdownHistogram.record(value, {model, phase}) is just a histogram with phase as a label; missing labels are simply absent in queries.

Why not redefine NETWORK_LATENCY: the spec name is slightly misleading (it's network + first-token-generation, not pure network latency), but:

• The enum is part of metrics.ts:330-334 which is exported from index.ts:117 and tested.
• Backend dashboards may already reference these phase names.
• Renaming or adding a new phase would be a breaking change for trivially marginal accuracy improvement.

Document the semantic in the design doc; leave the enum unchanged.

Why on the span path, not parallel: keeps recordApiRequestBreakdown colocated with span attribute writes — single gated emission point (see D7 idempotency), single ordering invariant.

D7 — endLLMRequestSpan idempotency: metric recording gated on existing double-end guard

Phase 1.5 (#4302) established that endLLMRequestSpan may be called twice (abort path + error path collision). The existing guard at session-tracing.ts:~470 (if (!activeSpans.has(...)) return;) prevents double span.end(). Phase 4 metric recording (D6) must sit inside the same guarded block, before span.end():

// session-tracing.ts — endLLMRequestSpan
const llmCtx = activeSpans.get(spanRef);
if (!llmCtx) return;            // already ended — double-end guard
activeSpans.delete(spanRef);    // claim the end

// ... compute duration, set attributes ...
if (metadata) {
  recordApiRequestBreakdown(config, llmCtx.attributes.model, [...]);   // NEW — gated
  recordTokenUsageMetrics(...); // existing
}

span.end();

This guarantees metric is recorded exactly once per LLM request, matching the span lifecycle.

Why not record in loggingContentGenerator: it doesn't see the abort path. Recording at the span lifecycle layer ensures every LLM request that opens a span produces exactly one breakdown sample, regardless of success/failure/abort.

D8 — GenAI semantic conventions dual-emit (private name authoritative)

Each Phase 4 attribute that corresponds to an OTel GenAI semconv attribute is written twice on the span:

Existing token attribute names on the LLM span (set in endLLMRequestSpan before Phase 4): qwen-code uses bare input_tokens and output_tokens already. Phase 4 adds the gen_ai.usage.* siblings to match #4410's pattern. The bare names stay; don't rename.

Fields with no GenAI semconv equivalent — request_setup_ms, sampling_ms, retry_total_delay_ms, attempt, output_tokens_per_second — are emitted only under the qwen-code namespace.

Why "private authoritative, semconv as compat":

• Internal dashboards, SLOs, debugLogger output, qwen-logger RUM, ARMS queries — all reference ttft_ms etc. Treating those as canonical avoids a flag-day migration.
• The Experimental GenAI semconv may rename gen_ai.server.time_to_first_token before reaching Stable. If/when it does, we update the semconv emission; the qwen-code names don't move.
• Future spec-aware backends (Datadog AI views, Honeycomb AI, ARMS GenAI dashboards) auto-pick up the gen_ai.* attributes without our involvement.

Why dual-emit unit conversion (ms ↔ seconds): GenAI semconv chose seconds-as-double for latency; qwen-code chose ms-as-int (matches duration_ms already on the span). Both representations have value; the conversion is cheap.

Helper API (additive to session-tracing.ts)

// session-tracing.ts — LLMRequestMetadata interface extended (additive)
export interface LLMRequestMetadata {
  // ... existing fields: inputTokens, outputTokens, cachedInputTokens, success, error, ...

  /** Time from successful attempt start to first user-visible content chunk (ms). Undefined for non-streaming or aborted-before-first-chunk requests. */
  ttftMs?: number;

  /** Time from generateContent entry to start of successful attempt (ms). Includes all failed retries + backoff. */
  requestSetupMs?: number;

  /** Final attempt number (1-based). 1 = no retries. */
  attempt?: number;

  /** Sum of all backoff delays before the successful attempt (ms). */
  retryTotalDelayMs?: number;
}

// No new exported helpers — Phase 4 reuses startLLMRequestSpan / endLLMRequestSpan with extended metadata.

// types.ts — new event class
export class ApiRetryEvent implements BaseTelemetryEvent {
  'event.name': typeof EVENT_API_RETRY = EVENT_API_RETRY;
  'event.timestamp': string;
  model: string;
  prompt_id?: string;
  attempt_number: number;
  error_type: string;
  error_message: string;
  status_code?: number;
  retry_delay_ms: number;
  duration_ms: number;  // = retry_delay_ms, drives LogToSpanProcessor bridge span width

  constructor(opts: { model: string; promptId?: string; attemptNumber: number; error: unknown; statusCode?: number; retryDelayMs: number }) { ... }
}

// constants.ts
export const EVENT_API_RETRY = 'qwen-code.api_retry';

// loggers.ts
export function logApiRetry(config: Config, event: ApiRetryEvent): void { ... }

// utils/retry.ts — RetryOptions extension
interface RetryOptions<T> {
  // ... existing ...
  onRetry?: (info: RetryAttemptInfo) => void;
}

interface RetryAttemptInfo {
  attempt: number;
  error: unknown;
  errorStatus?: number;
  delayMs: number;
}

// Inside retryWithBackoff, where logRetryAttempt is called today:
options.onRetry?.({ attempt, error, errorStatus, delayMs: actualDelay });
logRetryAttempt(attempt, error, errorStatus); // existing debugLogger call unchanged

Lifecycle wiring

Streaming path (the common case)

// loggingContentGenerator.ts:283 — generateContentStream
async generateContentStream(req, userPromptId): Promise<AsyncGenerator<GenerateContentResponse>> {
  const requestEntryTime = Date.now();
  let attemptStart = requestEntryTime;
  const attemptStartTimes: number[] = [attemptStart];
  let retryTotalDelayMs = 0;
  let finalAttempt = 1;

  // Use existing startLLMRequestSpan (Phase 1)
  // Pass onRetry callback to whatever retry layer is in use:
  const onRetry: RetryAttemptInfo & { invoke: ... } = (info) => {
    finalAttempt = info.attempt + 1;        // we're about to start attempt N+1
    retryTotalDelayMs += info.delayMs;
    attemptStart = Date.now() + info.delayMs; // approximate; actual reset is at top of next attempt
    attemptStartTimes.push(attemptStart);
    // emit ApiRetryEvent
    logApiRetry(this.config, new ApiRetryEvent({
      model: req.model,
      promptId: userPromptId,
      attemptNumber: info.attempt,
      error: info.error,
      statusCode: info.errorStatus,
      retryDelayMs: info.delayMs,
    }));
  };

  // stream wrapper detects first user-visible chunk:
  return this.processStreamGenerator(stream, ..., {
    onFirstUserVisibleChunk: (now) => {
      ttftMs = now - attemptStart;
    },
  });
}

At span end (already in Phase 1's endLLMRequestSpan flow), include the new fields in LLMRequestMetadata:

endLLMRequestSpan(llmSpan, {
  success: true,
  inputTokens,
  outputTokens,
  cachedInputTokens,
  ttftMs,
  requestSetupMs: attemptStart - requestEntryTime,
  attempt: finalAttempt,
  retryTotalDelayMs,
});

Non-streaming path

generateContent (loggingContentGenerator.ts:212) does not produce streaming chunks. TTFT is undefined; request_setup_ms is still meaningful (captures retry overhead). The breakdown metric records 2 phases (REQUEST_PREPARATION + RESPONSE_PROCESSING where RESPONSE_PROCESSING = duration_ms - request_setup_ms), not 3.

Retry layer integration (4 sites)

Each of the 4 LLM retryWithBackoff call sites adds onRetry:

// client.ts:1540 (similar at baseLlmClient.ts:193, 282, geminiChat.ts:1039)
const result = await retryWithBackoff(apiCall, {
  ...existingOptions,
  onRetry: (info) => {
    logApiRetry(
      this.config,
      new ApiRetryEvent({
        model,
        promptId: userPromptId,
        attemptNumber: info.attempt,
        error: info.error,
        statusCode: info.errorStatus,
        retryDelayMs: info.delayMs,
      }),
    );
    // also feed back into LoggingContentGenerator's local retry accumulator
    // (when in scope — for callers that don't go through LoggingContentGenerator,
    // the LLM span still gets `attempt` and `retry_total_delay_ms` via the
    // metadata path because endLLMRequestSpan is called at the LLM layer)
  },
});

The non-LLM caller (channels/weixin/src/api.ts) does not register onRetry — no ApiRetryEvent is emitted for its retries, matching today's behavior.

Concurrent safety — the headline guarantee

LoggingContentGenerator instance is shared (one per ContentGenerator, contentGenerator.ts:377). Three concurrent generateContentStream calls (e.g., 3 subagents fan out via coreToolScheduler.runConcurrently) execute three independent closures of generateContentStream:

call_A: attemptStart_A, ttftMs_A, ... (closure)
call_B: attemptStart_B, ttftMs_B, ... (closure)
call_C: attemptStart_C, ttftMs_C, ... (closure)

Per-call locals never overlap. Stream chunks are detected against the local attemptStart of each call. Span attributes are set at each call's own endLLMRequestSpan.

AsyncLocalStorageContextManager (registered by NodeSDK at sdk.ts:273) already ensures the active OTel context — and thus the parent span passed to startLLMRequestSpan — is correct per fiber.

Files to change

Total: 14 files, ~610 LOC. Larger than Phase 2 (#4321) but comparable to Phase 3 (#4410) and justified by the breadth of integration (4 retry sites + telemetry plumbing + streaming wrapper).

If review pushes back on size: split into Phase 4a + 4b + 4c:

• 4a (~200 LOC): TTFT capture + extended LLMRequestMetadata + dual-emit. Self-contained value (TTFT visibility from day one).
• 4b (~250 LOC): onRetry callback + ApiRetryEvent + 4 caller wiring. Independently a bug fix for the retryWithBackoff telemetry gap.
• 4c (~160 LOC): recordApiRequestBreakdown activation + parent span aggregation attrs (attempt, retry_total_delay_ms, sampling_ms, output_tokens_per_second). Depends on 4a + 4b.

Testing strategy

Edge cases

Rollback

The change is additive at the OTel and metric level — every new attribute is optional, every new event is a new class. Existing dashboards that don't filter on the new fields keep working unchanged.

Behavior-affecting changes:

• New ApiRetryEvent LogRecord starts flowing → log volume increases proportional to retry rate (typically <1% of requests retry). Mitigate by sampling LogRecord at the SDK layer if needed.
• New breakdown metric qwen-code.api.request.breakdown starts producing time series → mild Prometheus cardinality bump ({model, phase} — bounded).
• output_tokens_per_second derived attribute may appear unusual on dashboards filtering "all attributes" — document.

Rollback path: revert the single PR (or each of 4a/4b/4c independently). All new fields use defensive defaults (undefined / 0) and don't change span structure.

Sequencing

• After Phase 3 (#4410, in review): not a hard dependency. Phase 4 attributes attach to qwen-code.llm_request spans regardless of whether they're under a qwen-code.subagent (Phase 3) or qwen-code.interaction (Phase 1) parent. Recommend Phase 3 land first so per-attempt aggregation under subagent subtrees works naturally.
• Independent of #4384 (traceparent + X-Qwen-Code-Session-Id outbound propagation). They touch the HTTP layer; Phase 4 touches the stream/retry/metric layer.
• Independent of clearDetailedSpanState chat-compression follow-up (#4097 follow-up). Different surface.

Open questions

1. onRetry callback firing semantics: invoked before backoff sleep (current proposal) or after (when the next attempt is about to start)? Before is simpler — callback has all the info immediately; after would require capturing the just-completed delay separately. Pre-sleep is the recommendation; document in callback contract.
2. Per-attempt timing on the LLM span: should we add attempt_durations_ms: number[] array? OTel supports array-of-primitive attributes. Useful for "which attempt of N was slow" diagnostics. Defer until production data shows demand — log-bridge spans already carry the equivalent.
3. Persistent retry mode emission cap: at what attempt > N threshold should we start sampling? N = 5 then 1-in-10? N = 10 then summary-only? Defer until we have production volume data.
4. TOKEN_PROCESSING phase: keep enum value dormant or wire it to something (e.g., consolidation time)? Defer — wait for a real use case.
5. Subagent-level LLM rollups: trivial follow-up once Phase 4 lands — sum ttft_ms/output_tokens/input_tokens per subagent subtree. Not Phase 4 scope but the data flow enables it.