Dual Output

Dual Output is a sidecar mode for the interactive TUI: while Qwen Code keeps rendering normally on stdout, it concurrently emits a structured JSON event stream to a separate channel so an external program — an IDE extension, a web frontend, a CI pipeline, an automation script — can observe and steer the session.

It also provides a reverse channel: an external program can write JSONL commands into a file that the TUI watches, allowing it to submit prompts and respond to tool-permission requests as if a human were at the keyboard.

Dual Output is fully optional. When the flags below are absent the TUI behaves exactly as before with no extra I/O and no behavioral changes.

Use cases

Dual Output is a low-level plumbing primitive. These are concrete integrations it unlocks:

Terminal + Chat dual-mode real-time sync

The flagship use case. A web or desktop ChatUI hosts the TUI inside a PTY and renders a parallel conversation view driven by the structured event stream:

• User can type in either surface — the TUI (for terminal-native power-users) or the web UI (for richer UX, shareable links, mobile). Both views stay in sync because every message flows through the same JSON events.
• Tool-approval prompts appear in both places; whoever approves first wins.
• Session history is captured verbatim from --json-file, so the server side has a canonical machine-readable transcript without parsing ANSI.

IDE extensions (VS Code / JetBrains / Cursor / Neovim)

Embed Qwen Code inside the IDE. The TUI runs in the editor's integrated terminal panel for users who want it, while the extension consumes --json-fd / --json-file events to drive:

• Inline diff overlays when the agent touches files.
• A webview side panel with formatted markdown, syntax-highlighted tool calls, and clickable citations.
• Status bar indicators (thinking / responding / awaiting approval).
• Programmatic confirmation_response writes when the user clicks a native IDE approval button.

Browser-based Chat frontends

A Node/Bun server spawns the TUI in a PTY for its rendering semantics but exposes a WebSocket channel to the browser. Events on --json-file are forwarded to the client; user messages typed in the browser are injected via --input-file. No ANSI parsing on either side.

CI / automation observers

A CI job runs Qwen Code with a task prompt. The human sees the TUI in the job log; the CI system tails --json-file to:

• Fail the job if a result event reports an error.
• Push token usage / duration_ms / tool_use counts to metrics.
• Archive the full transcript as a build artifact.

Multi-agent orchestration

A supervisor agent spawns multiple TUI workers, each with its own pair of event/input files. It watches progress, injects follow-up prompts, and enforces global budget / safety policies by approving or denying tool calls across all workers.

Session recording, audit, and replay

Tee every TUI session to a regular file with --json-file. Later:

• Compliance audits can reconstruct exactly what was executed.
• Automated regression tests can compare runs across model versions.
• A replay tool can re-emit events through the same protocol to feed visualization dashboards.

Observability dashboards

Stream --json-file into Loki / OTEL / any pipeline that accepts JSONL. Extract usage.input_tokens, tool_use.name, result.duration_api_ms as first-class metrics in Grafana. No need for log-parsing regex.

Testing and QA

Integration tests spawn Qwen Code headlessly, drive it with --input-file scripts, and assert on --json-file events. Unlike parsing stdout ANSI, assertions are stable across UI refactors.

Flags

--json-fd and --json-file are mutually exclusive. fds 0, 1, and 2 are rejected to prevent corrupting the TUI's own output.

Why two output flags? (--json-fd vs --json-file)

At first glance --json-fd looks sufficient — the caller spawns Qwen Code with an extra file descriptor, the TUI writes events to it, done. In practice, fd passing breaks down under the most important embedding scenario: running the TUI inside a pseudo-terminal (PTY). That is why this feature also exposes a path-based alternative.

When --json-fd works

Pure child_process.spawn with a stdio array:

const child = spawn('qwen', ['--json-fd', '3'], {
  stdio: ['inherit', 'inherit', 'inherit', eventsFd],
});

Node's spawn supports arbitrary stdio entries; fd 3 is inherited by the child, which can write to it directly. Zero-copy, zero-buffer, zero filesystem — the fastest path.

Why --json-fd does not work under PTY

PTY wrappers like node-pty and bun-pty are how any serious embedder (IDE extensions, web terminals, tmux-like multiplexers) hosts an interactive TUI. They cannot forward extra fds to the child, for three reinforcing reasons:

1. API surface. node-pty.spawn(file, args, options) accepts cwd, env, cols, rows, encoding, etc. — but no stdio array. There is simply no place in the API to say "also attach this fd as fd 3 in the child". bun-pty exposes the same shape.
2. forkpty(3) semantics. Under the hood, PTY wrappers call forkpty(3) (or the equivalent posix_openpt + login_tty dance). That syscall allocates a master/slave pseudo-terminal pair and redirects the child's fds 0/1/2 to the slave side so the child thinks it is attached to a real terminal. Any fds above 2 in the parent are closed by login_tty, which calls close(fd) for fd >= 3 before exec. Extra fds are actively wiped, not inherited.
3. Controlling-terminal side effect. Even if you hacked an extra fd through, it would not be a terminal, so the child's TUI renderer (which writes escape sequences assuming a TTY on fd 1) would still need the slave for its output. You would end up with two independent transports anyway.

In short: the moment an embedder needs a real TTY for TUI rendering — which is every IDE extension, every web terminal, every desktop chat app — fd inheritance is off the table.

--json-file fills the gap

A file path is passed as an ordinary CLI argument, so it survives every spawn model:

import { spawn } from 'node-pty';

const pty = spawn(
  'qwen',
  [
    '--json-file',
    '/tmp/qwen-events.jsonl',
    '--input-file',
    '/tmp/qwen-input.jsonl',
  ],
  { cols: 120, rows: 40 },
);

The child opens the file itself and writes events there; the embedder tails the same path with fs.watch + incremental reads. Three things to note:

• Regular file, FIFO (named pipe), or /dev/fd/N all work. FIFO is the lowest-latency option when both sides are on the same host.
• The bridge opens FIFOs with O_NONBLOCK and falls back to blocking mode on ENXIO (no reader yet), so PTY startup is never deadlocked waiting for a consumer.
• For multi-session isolation, use per-session paths under $XDG_RUNTIME_DIR or a mkdtemp'd directory with mode 0700.

Which flag should I use?

The general rule: if you need the TUI to render correctly, you need a PTY, which means you need --json-file. --json-fd is for simpler embedders that do not care about TUI fidelity — typically programmatic wrappers that throw away stdout anyway.

Quick start

Run Qwen Code with all three channels enabled:

mkfifo /tmp/qwen-events.jsonl /tmp/qwen-input.jsonl
qwen \
  --json-file /tmp/qwen-events.jsonl \
  --input-file /tmp/qwen-input.jsonl

In a second terminal, tail the event stream:

cat /tmp/qwen-events.jsonl

In a third terminal, push a prompt into the running TUI:

echo '{"type":"submit","text":"Explain this repo"}' >> /tmp/qwen-input.jsonl

The prompt appears in the TUI exactly as if the user typed it, and the streaming response is mirrored on /tmp/qwen-events.jsonl.

Output event schema

Events are emitted as JSON Lines (one object per line). The schema is the same one used by the non-interactive --output-format=stream-json mode, with includePartialMessages always enabled.

The first event on the channel is always system / session_start, emitted when the bridge is constructed. Use it to correlate the channel with a session id before any other event arrives.

// Session lifecycle
{
  "type": "system",
  "subtype": "session_start",
  "uuid": "...",
  "session_id": "...",
  "data": { "session_id": "...", "cwd": "/path/to/cwd" }
}

// Streaming events for an in-progress assistant turn
{ "type": "stream_event", "event": { "type": "message_start", "message": { ... } }, ... }
{ "type": "stream_event", "event": { "type": "content_block_start", "index": 0, "content_block": { "type": "text" } }, ... }
{ "type": "stream_event", "event": { "type": "content_block_delta", "index": 0, "delta": { "type": "text_delta", "text": "Hello" } }, ... }
{ "type": "stream_event", "event": { "type": "content_block_stop", "index": 0 }, ... }
{ "type": "stream_event", "event": { "type": "message_stop" }, ... }

// Completed messages
{ "type": "user", "message": { "role": "user", "content": [...] }, ... }
{ "type": "assistant", "message": { "role": "assistant", "content": [...], "usage": { ... } }, ... }
{ "type": "user", "message": { "role": "user", "content": [{ "type": "tool_result", ... }] } }

// Permission control plane (only when a tool needs approval)
{
  "type": "control_request",
  "request_id": "...",
  "request": {
    "subtype": "can_use_tool",
    "tool_name": "run_shell_command",
    "tool_use_id": "...",
    "input": { "command": "rm -rf /tmp/x" },
    "permission_suggestions": null,
    "blocked_path": null
  }
}
{
  "type": "control_response",
  "response": {
    "subtype": "success",
    "request_id": "...",
    "response": { "allowed": true }
  }
}

control_response is emitted whether the decision was made in the TUI (native approval UI) or by an external confirmation_response (see below). Either way, all observers see the final outcome.

Input command schema

Two command shapes are accepted on --input-file:

// Submit a user message into the prompt queue
{ "type": "submit", "text": "What does this function do?" }

// Reply to a pending control_request
{ "type": "confirmation_response", "request_id": "...", "allowed": true }

Behavior:

• submit commands are queued. If the TUI is busy responding, they are retried automatically the next time the TUI returns to the idle state.
• confirmation_response commands are dispatched immediately and never queued, because a tool call is blocking and the response must reach the underlying onConfirm handler without waiting for any earlier submit.
• Whichever side approves a tool first wins; the other side's late response is harmlessly dropped.
• Lines that fail to parse as JSON are logged and skipped — they do not stop the watcher.

Latency notes

The input file is observed with fs.watchFile at a 500 ms polling interval, so worst-case round-trip latency for a remote submit is about half a second. This is intentional: polling is portable across platforms and filesystems (including macOS / network mounts), and matches the typical human-in-the-loop pacing the feature targets. The output channel has no polling — events are written synchronously as the TUI emits them.

Failure modes

• Bad fd. If the fd passed to --json-fd is not open or is one of 0/1/2, the TUI prints a warning to stderr and continues without dual output enabled.
• Bad path. If the file passed to --json-file cannot be opened, the TUI prints a warning and continues without dual output.
• Consumer disconnect. If the reader on the other side of the channel goes away (EPIPE), the bridge silently disables itself and the TUI keeps running. No retry.
• Adapter exception. Any exception thrown while emitting an event is caught, logged, and disables the bridge. The TUI is never crashed by a dual-output failure.

Spawn example

A typical embedding parent process spawns Qwen Code with both channels:

import { spawn } from 'node:child_process';
import { openSync } from 'node:fs';

const eventsFd = openSync('/tmp/qwen-events.jsonl', 'w');
const child = spawn(
  'qwen',
  ['--json-fd', '3', '--input-file', '/tmp/qwen-input.jsonl'],
  { stdio: ['inherit', 'inherit', 'inherit', eventsFd] },
);

The TUI still owns the user's terminal on stdio 0/1/2, while the embedder reads structured events on the file backing fd 3 and pushes commands by appending JSONL lines to /tmp/qwen-input.jsonl.

Settings-based configuration

For long-lived embedders it is often inconvenient to thread CLI flags through every launch. The same channels can be configured in settings.json under the top-level dualOutput key:

// ~/.qwen/settings.json  (user-level)
// or <workspace>/.qwen/settings.json  (workspace-level)
{
  "dualOutput": {
    "jsonFile": "/tmp/qwen-events.jsonl",
    "inputFile": "/tmp/qwen-input.jsonl",
  },
}

Precedence rules:

• CLI flag wins over settings. Passing --json-file /foo on the command line overrides dualOutput.jsonFile in settings.
• --json-fd has no settings equivalent — fd passing is a spawn-time concern that cannot be statically declared.
• If neither flag nor setting is present, dual output stays disabled (identical to today's default).

The requiresRestart: true flag means changes only take effect on the next Qwen Code launch, since the bridge is constructed once during startup.

Runnable demos

Every script below is copy-paste ready. Start with POC 1 to verify the build has dual output; POC 4 is the closest analogue to a real IDE-extension integration.

POC 1 — observe the event stream

Watch every structured event the TUI emits while a human uses it normally:

# Terminal A
mkfifo /tmp/qwen-events.jsonl
cat /tmp/qwen-events.jsonl | jq -c 'select(.type != "stream_event") | {type, subtype}'

# Terminal B
qwen --json-file /tmp/qwen-events.jsonl
# ...then chat normally; terminal A shows session_start,
# user/assistant/result/control_request lifecycle in real time.

Expected first line in terminal A:

{ "type": "system", "subtype": "session_start" }

POC 2 — inject prompts from outside

Drive the TUI from a second terminal without touching the keyboard of the first:

# Terminal A
touch /tmp/qwen-in.jsonl
qwen --input-file /tmp/qwen-in.jsonl

# Terminal B — the TUI responds as if you typed it
echo '{"type":"submit","text":"list files in the current directory"}' \
  >> /tmp/qwen-in.jsonl

POC 3 — remote tool-permission bridge

Approve or deny tool calls from a separate process:

# Terminal A — observe control_requests
mkfifo /tmp/qwen-out.jsonl
touch /tmp/qwen-in.jsonl
(cat /tmp/qwen-out.jsonl \
  | jq -c 'select(.type == "control_request")') &

# Terminal B
qwen --json-file /tmp/qwen-out.jsonl --input-file /tmp/qwen-in.jsonl
# Ask Qwen to do something that needs approval, e.g.
# "run `ls -la /tmp`". A control_request will appear in terminal A.
# Copy the request_id, then in a third terminal:
echo '{"type":"confirmation_response","request_id":"<paste-id>","allowed":true}' \
  >> /tmp/qwen-in.jsonl
# The TUI confirmation prompt dismisses and the tool executes.

If you reply with an unknown request_id, the bridge emits a control_response with subtype: "error" on the output channel so your consumer can log it or retry:

{
  "type": "control_response",
  "response": {
    "subtype": "error",
    "request_id": "...",
    "error": "unknown request_id (already resolved, cancelled, or never issued)"
  }
}

POC 4 — Node embedder (IDE-like)

The most realistic shape: a parent process spawns Qwen Code, tails events, and injects prompts on its own schedule.

// demo-embedder.ts
import { spawn } from 'node:child_process';
import { appendFileSync, createReadStream, writeFileSync } from 'node:fs';
import { createInterface } from 'node:readline';
import { tmpdir } from 'node:os';
import { join } from 'node:path';

const events = join(tmpdir(), `qwen-events-${process.pid}.jsonl`);
const input = join(tmpdir(), `qwen-input-${process.pid}.jsonl`);
writeFileSync(events, '');
writeFileSync(input, '');

const child = spawn('qwen', ['--json-file', events, '--input-file', input], {
  stdio: 'inherit',
});

// Tail the output channel. In production you'd use a proper
// byte-offset tail; this one re-streams from 0 for brevity.
const rl = createInterface({
  input: createReadStream(events, { encoding: 'utf8' }),
});
rl.on('line', (line) => {
  if (!line.trim()) return;
  const ev = JSON.parse(line);
  if (ev.type === 'system' && ev.subtype === 'session_start') {
    console.log('[embedder] handshake:', {
      protocol_version: ev.data.protocol_version,
      version: ev.data.version,
      supported_events: ev.data.supported_events,
    });
    // Feature-detect before using a capability
    if (ev.data.supported_events.includes('control_request')) {
      console.log('[embedder] permission control-plane available');
    }
  }
  if (ev.type === 'assistant') {
    console.log(
      '[embedder] assistant turn ended, tokens =',
      ev.message.usage?.output_tokens,
    );
  }
  if (ev.type === 'system' && ev.subtype === 'session_end') {
    console.log('[embedder] session ended cleanly');
  }
});

// After 2s, inject a prompt as if the user typed it
setTimeout(() => {
  appendFileSync(
    input,
    JSON.stringify({ type: 'submit', text: 'hello from embedder' }) + '\n',
  );
}, 2000);

child.on('exit', () => process.exit(0));

Run with:

npx tsx demo-embedder.ts
# Qwen Code TUI opens in the current terminal; the embedder logs
# handshake + turn-end + session_end events to the parent's stdout.

POC 5 — capability handshake feature detection

Older Qwen Code versions won't emit protocol_version. Treat the field as optional and feature-detect:

rl.on('line', (line) => {
  const ev = JSON.parse(line);
  if (ev.type === 'system' && ev.subtype === 'session_start') {
    const v = ev.data?.protocol_version ?? 0;
    if (v < 1) {
      console.error(
        'qwen-code dual output is present but protocol < 1; ' +
          'falling back to best-effort behavior',
      );
    } else {
      console.log('qwen-code dual output protocol v' + v);
    }
  }
});

POC 6 — session_end as a clean termination signal

rl.on('line', (line) => {
  const ev = JSON.parse(line);
  if (ev.type === 'system' && ev.subtype === 'session_end') {
    console.log('[embedder] clean shutdown, session', ev.data.session_id);
    // Flush metrics, close WebSockets, etc.
  }
});

If the TUI crashes before session_end, the output stream closes (EPIPE on next write); embedders should handle both paths.

POC 7 — failure drills (prove the flags never break the TUI)

qwen --json-fd 1
# stderr: "Warning: dual output disabled — ..."
# TUI still launches normally.

qwen --json-fd 9999
# stderr: "Warning: dual output disabled — fd 9999 not open"
# TUI still launches normally.

qwen --json-fd 3 --json-file /tmp/x.jsonl
# yargs rejects: "--json-fd and --json-file are mutually exclusive."
# Process exits before TUI starts.

qwen --json-file /nonexistent/dir/x.jsonl
# stderr warning; TUI still launches.

Relation to Claude Code

Claude Code exposes a similar stream-json event format under --print --output-format stream-json, but only in non-interactive mode — it has no equivalent of running the TUI and a structured sidecar channel at the same time. Dual Output fills that gap.