ContextQMD
Back to Qmk Firmware

KKC Wily

keyboards/wily/readme.md

4.01.2 KB
Original Source

KKC Wily

The Wily is a 65% keyboard by Keyote Key Company.

  • Keyboard Maintainer: gondolindrim
  • Hardware Supported: three PCB variants (solderable, hotswap with Tsangan bottom row, hotswap with default bottom row), both based on STM32F072
  • Hardware Availability: not yet available for purchase as of november 2025.

Make example for this keyboard (after setting up your build environment):

make wily/<version>:default

Where <version> can be either wily_s , wily_h625 or wily_h700. Flashing example for this keyboard:

make wily/<version>:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (Escape) and plug in the keyboard
  • Physical reset button: press and hold the button on the back of the PCB for five seconds
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available