E8ghty

A TKL keyboard PCB compatible with various keyboard cases. Supports both right USB Type-C connector and bottom USB Type-C connector, 1 FPC header, and 3 JST SH positions for a daughter board.

• Keyboard Maintainer: ThanhSon.Mech
• Hardware Supported: STM32F103/STM32F072, Geon F1 xx, TKD Cycle 8, Keycult, ...
• Hardware Availability: ThanhSon.Mech

Make example for this keyboard (after setting up your build environment):

make trnthsn/e8ghty:default

Flashing example for this keyboard:

make trnthsn/e8ghty:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

• Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
• Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
• Keycode in layout: Press the key mapped to QK_BOOT if it is available