Viktus Styrka Atmel Edition

The Viktus Styrka is a 65% + left macro block created in a collaboration of OneCreativeMind and BlindAssassin111 (Viktus owner).

This is a custom Atmel ISO Hotswap PCB for the Viktus Styrka designed and maintained by NoPunIn10Did.

• Firmware Maintainer: nopunin10did
• Hardware Supported: Styrka
• Hardware Availability: https://www.Viktus.Design

Make example for this keyboard (after setting up your build environment):

make nopunin10did/styrkatmel:default

Flashing example for this keyboard:

make nopunin10did/styrkatmel:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Enter the bootloader in 3 ways:

• Bootmagic reset: Hold down the key at the top left in the macro columns (default: F1) and plug in the keyboard.
• Physical reset button: Briefly press the button on the back of the PCB.
• Keycode in layout: Press the key mapped to QK_BOOT. For the default layout, hold down the rightmost 1.25u key on the bottom row, then tap the top-left key in the macro columns.