Slimdash

SlimDash is a slim low profile split ortho-staggered keyboard inspired by omkbd/ErgoDash with following key highlights:

• Ortho-Staggered Split keyboard layout
• Slim body (20-22mm depending on key caps and rubber feet used)
• Rigid body structure
• Per-Key RGB LED Matrix lighting
• USB-C connector
• Easy build utilizing PCBA service for the harder SMT components
• Keyboard Maintainer: mizma
• Hardware Supported: SlimDash
• Hardware Availability: Build your own using design data at SlimDash

Make example for this keyboard (after setting up your build environment):

make mzmkb/slimdash/rev1:default

Flashing example for this keyboard:

make mzmkb/slimdash/rev1:default:flash

You may also enter Bootloader on your keyboard, and copy the mzmkb_slimdash_*_*.uf2 file into the RPI-RP2 drive shown in your PC.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

• Reset button: Double-tap the RESET button on the side of the keyboard near TRRS jack.
• Physical reset button: Hold BOOT_SW and press RESET on the side of the keyboard near TRRS jack.
• Keycode in layout: Press the key mapped to QK_BOOT if it is available