M65

A (13x5) ortholinear keyboard that can be hand wired or using a pcb.

• Keyboard Maintainer: Alin Elena (@drFaustroll on GitLab)
• Hardware Supported: custom pcb see STM/APM32F103C8T6, aka Black Pill (rev1), GD32F303CCT6 from we act aka Blue Pill Plus (rev2), STM32F401 from we act (rev3,rev4) STM32F411 can also be used just ask
• Hardware Availability: custom how to

Make example for this keyboard (after setting up your build environment):

For rev1

make mlego/m65/rev1:default

Flashing example for this keyboard:

make mlego/m65/rev1:default:flash

To enter flashing mode, press Lower+Raise+R.

For rev2

make mlego/m65/rev2:default

Flashing example for this keyboard:

make mlego/m65/rev2:default:flash

To enter flashing mode, on microcontroller keep pressed KEY and then NRST, release NRST and then after 1s release KEY.

For rev3

make mlego/m65/rev3:default

Flashing example for this keyboard:

make mlego/m65/rev3:default:flash

To enter flashing mode, on microcontroller keep pressed BOOT0 and then NRST, release NRST and then after 0.5s or so release BOOT0.

For rev4

make mlego/m65/rev4:default

Flashing example for this keyboard:

make mlego/m65/rev4:default:flash

To enter flashing mode, press in the same time, LWR+RSE+r, alternatively on microcontroller keep pressed BOOT0 and then NRST, release NRST and then after 0.5s or so release BOOT0.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Pins and leds rev1 STM/APM32F103C8T6

similar pinout for STM32F303

Encoders

• Pad_A: A8
• Pad_B: A9

Leds

Pins and leds rev2 GD32F303CCT6

Encoders

• Pad_A: A8
• Pad_B: A9

Leds

Pins and leds rev3 stm32f401

the pinout is the same for stm32f411

Encoders

• Pad_A: A0
• Pad_B: B6

LEDS

Pins and leds rev4 stm32f401

the pinout is the same for stm32f411

Encoders

• Pad_A: A0
• Pad_B: B6

Oled

• SDA: B9
• SCL: B8

LEDS