Keychron C2 Pro V2

A customizable 100% keyboard.

Rev1 is based on STM32L432 and rev2 is based on STM32F402.

• Keyboard Maintainer: Keychron
• Hardware Supported: Keychron C2 Pro
• Hardware Availability: Keychron C2 Pro QMK/VIA Wired Mechanical Keyboard

Make example for this keyboard (after setting up your build environment):

make keychron/c2_pro_v2/ansi/rgb:default
make keychron/c2_pro_v2/ansi/white:default

Flashing example for this keyboard:

make keychron/c2_pro_v2/ansi/rgb:default:flash
make keychron/c2_pro_v2/ansi/white:default:flash

bootloader

Enter the bootloader in two ways:

• Bootmagic reset: Hold down the key located at K00, commonly programmed as Esc while plugging in the keyboard.
• Physical reset button: Briefly press the RESET button under the spacebar.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.