Haverworks Theseus75

The Theseus75 is a 75% row-staggered split keyboard with a macro column and rotary encoders on both sides. Each half features a dual-role USB-C port and integrated USB hub, allowing the unused port to act as a USB-C 2.0 High-Speed host for connecting a numpad, mouse, flash drive, security key, mobile phone, or similar device.

[!NOTE] Up to 5V at 1.5A can be supplied, depending on negotiations with the host.

• Keyboard Maintainers: Moritz Plattner, Alex Havermale
• Hardware Supported: Haverworks Theseus75 v1 PCBs (hot-swap and solder)
• Hardware Availability: Group buy

Make example for this keyboard (after setting up your build environment):

make haverworks/theseus75:default

Flashing example for this keyboard:

make haverworks/theseus75:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in two ways:

• Physical reset button: Hold the <kbd>Reset</kbd>/<kbd>Flash</kbd> button on the back of the PCB for approximately one second (instructions are also included on the PCB)
• Bootmagic reset:
  • Left half: Hold down the first key to the right of the encoder (<kbd>Esc</kbd> by default) and plug in the keyboard
  • Right half: Hold down the first key to the left of the encoder (<kbd>Print Screen</kbd> by default) and plug in the keyboard