Drashna's Blackpill Tractyl Manuform (5x6) with a right side trackball

• Split Hand Pin, using PC14

• Full Duplex Serial/USART using PA9 and PA10 on USART1

• DAC Audio using PA4 and PA5

• PWM RGB using PA6 TIM3

• pmw3360 sensor using PA5-PA7 on SPI2, with B as CS pin

• 8KB SPI EEPROM chip sharing PB13-PB15 on SPI1 with PB9 as CS pin

• Encoder using PA7 and PA8

• SSD1306 OLED display (128x64) using PB6 and PB7 on I2C1

• Keyboard Maintainer: Drashna Jael're

• Hardware Supported: Design files, WeAct BlackPill (F411), PMW3360 Optical Sensor

Make example for this keyboard (after setting up your build environment):

make handwired/tractyl_manuform/5x6_right/f411:default

Flashing example for this keyboard:

make handwired/tractyl_manuform/5x6_right/f411:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.