Back to Qmk Firmware

Teensy 3.2 onekey

keyboards/handwired/onekey/teensy_32/readme.md

4.01.8 KB
Original Source

Teensy 3.2 onekey

To trigger keypress, short together pins D5 and B2 (marked on the PCB as 20 and 19).

Hardware

Pins

When setting matrix pins, you need to use the MCU definitions instead of what is printed on the PCB. Sourced from https://www.pjrc.com/teensy/schematic32.gif. The following table can be used to convert between the two.

PCBMCUNotes
0B16
1B17
2D0
3A12
4A13
5D7
6D4
7D2
8D3
9C3
10C4
11C6
12C7
13/LEDC5
14/A0D1
15/A1C0
16/A2B0
17/A3B1
18/A4B3
19/A5B2
20/A6D5
21/A7D6
22/A8C1
23/A9C2
24/A10ADC0_DP0 in schematic [1]
25/A11ADC0_DM0 in schematic [1]
26/A12ADC0_DP3 in schematic [1]

[1] - Currently not configured and may require extra work to implement.