meck_tkl

A standard tenkeyless keyboard, using STM32 Blackpill.

• Keyboard Maintainer: Gabriel Kim
• Hardware Supported: Blackpill F401
• Hardware Availability: Thingiverse: Mechanical Keyboard - MECH - TKL

Make example for this keyboard (after setting up your build environment):

make handwired/meck_tkl:default

Flashing example for this keyboard:

make handwired/meck_tkl:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

• Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
• Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
• Keycode in layout: Press the key mapped to QK_BOOT if it is available

Wiring instructions

• On Blackpill boards, avoid using the following pins, since they will cause either USB enumeration or the DFU bootloader to not work correctly:
  • USB-related pins: PA10, PA11, PA12
  • BOOT1 pin: PB2

Sample wiring: