keyboards/handwired/magicforce61/readme.md
Basically I cut 7 keys off the magicforce68 and handwired everything to a teensy++ 2.0 to make it a ~60% board.
Keyboard Maintainer: The QMK Community
Hardware Supported: magicforce61, teensy++ 2.0
Make example for this keyboard (after setting up your build environment):
make handwired/magicforce61:default
Flash the firmware using the teensy loader or avrdude.
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
| B5 | B4 | B3 | B2 | B1 | B0 | E7 | E6 | F0 | F1 | F2 | F3 | F4 | F5 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| D0 | Esc | 1! | 2@ | 3# | 4$ | 5% | 6^ | 7& | 8* | 9( | 0) | -_ | =+ | Bspc |
| D1 | Tab | Q | W | E | R | T | Y | U | I | O | P | [{ | ]} | \| |
| D2 | Caps | A | S | D | F | G | H | J | K | L | ;: | '" | Ent | |
| D3 | LSft | Z | X | C | V | B | N | M | , | . | / | RSft | ||
| D4 | LCtl | LGUI | LAlt | Spc | RAlt | RGUI | App | RCtl |
The following pins are used:
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D4 }
#define MATRIX_COL_PINS { B5, B4, B3, B2, B1, B0, E7, E6, F0, F1, F2, F3, F4, F5 }